Effect of Plasma Cladding Speed on the Microstructure and Properties of ZrC-ZrB2/NiAl Coating

被引：0

作者：

Xia, Pengcheng ^{[1
]}

Li, Ye ^{[1
]}

Xie, Kun ^{[1
]}

Cao, Meiqing ^{[1
]}

Tan, Yunliang ^{[2
]}

机构：

[1] Shandong Univ Sci & Technol, Sch Mat Sci & Engn, Qingdao 266590, Peoples R China

[2] Shandong Univ Sci & Technol, Shandong Prov & Minist Sci & Technol, State Key Lab Min Disaster Prevent & Control, Qingdao 266590, Peoples R China

来源：

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | 2021年 / 24卷 / 04期

基金：

国家高技术研究发展计划(863计划);

关键词：

in-situ synthesis; wear resistance; microhardness; ZrC-ZrB < sub > 2 <; sub >; NiAl composite coating; C/C COMPOSITES; ZRB2; EVOLUTION;

D O I：

10.1590/1980-5373-MR-2020-0535

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

NiAl composite coating strengthened by ZrC and ZrB2 phases is synthesized by the plasma cladding process. The influence of cladding speed on microstructrue and properties of coatings is studied. The main phases of coatings are NiAl, gamma-(Fe,Ni), ZrC and ZrB2 phases. ZrC is in the shape of points and small blocks, ZrB2 shows long strips and needle bar. The slower the cladding speed, the larger the size of the reinforcing phases. With the increase of cladding speed, the wear resistance of the coatings improves. Coating with the cladding speed of 10mm/s has excellent wear-resistance property owing to high hardness and low friction coefficient. ZrC and ZrB2 strengthening phases play an important role. The main wear mechanism of NiAl composite coating is adhesive wear.

引用

页数：8

共 50 条

[1] MICROSTRUCTURE AND PROPERTIES OF IN SITU SYNTHESIZED ZrC-ZrB2/Fe COMPOSITE COATING PRODUCED BY GTAW
Wang, Zhenting
Chen, Lili
Zhang, Xianyou
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 1438 - 1443
[2] Microstructure and properties of ZrB2-SiC continuous gradient coating prepared by high speed laser cladding
Liu, Jin
Li, Yang
He, Pengfei
Tan, Na
Li, Qiu
Zhang, Guoliang
Lu, Bingwen
TRIBOLOGY INTERNATIONAL, 2022, 173
[3] Fabrication and properties of ZrC-ZrB2/Ni cermet coatings on a magnesium alloy by atmospheric plasma spraying of SHS powders
Xu, Jiaying
Zou, Binglin
Zhao, Sumei
Hui, Yu
Huang, Wenzhi
Zhou, Xin
Wang, Ying
Cai, Xiaolong
Cao, Xueqiang
CERAMICS INTERNATIONAL, 2014, 40 (10) : 15537 - 15544
[4] Effect of Scanning Speed on Microstructure and Properties of Laser Cladding NiCoCrAlY Coating
Wang Tao
Qiao Weilin
Wang Ning
Zhang Jin
Tang Jie
Wang Hao
Wu Jun
LASER & OPTOELECTRONICS PROGRESS, 2020, 57 (21)
[5] Microstructure and Tribological Properties of Laser Cladding ZrB2-SiC Reinforced Cu Matrix Composite Coating
Zhao Yuehong
Zhan Zaiji
Lv Xiangzhe
Cao Haiyao
RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (01) : 267 - 273
[6] Effect of Mo Content on Microstructure and Fatigue Properties of Ni60 Coating Produced by Plasma Cladding
Wen, Feijuan
Long, Zhang
Xing, Zhiguo
Wen, Pengcheng
Zhou, Peishan
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2023, 32 (05) : 1389 - 1405
[7] Effect of WC content on microstructure and properties of high-speed laser cladding Ni-based coating
Hu, Zeyu
Li, Yang
Lu, Bingwen
Tan, Na
Cai, Lanrong
Yong, Qingsong
OPTICS AND LASER TECHNOLOGY, 2022, 155
[8] Effect of power on microstructure and properties of laser cladding NiCrBSi composite coating
Wang Kai-ming
Fu Han-guang
Li Yu-long
Lei Yong-ping
Wei Shi-zhong
Su Zhen-qing
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2017, 95 (06): : 328 - 336
[9] Effect of laser cladding speed on microstructure and properties of titanium alloy coating on low carbon steel
Gao, Wei
Wang, Shi-cheng
Hu, Kang-kai
Jiang, Xu-zhou
Yu, Hong-ying
Sun, Dong-bai
SURFACE & COATINGS TECHNOLOGY, 2022, 451
[10] Microstructure and Properties of ZrC Enhanced Laser Cladding CoCrNi Alloy Cladding Layer
Liu Ran
Dang Xianting
Chen Chuqi
Wu Tao
RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (03) : 778 - 786

← 1 2 3 4 5 →