Stress intensity factors of two diametrically opposed edge cracks in a thick-walled functionally graded material cylinder

A method is developed to evaluate stress intensity factors for two diametrically-opposed edge cracks emanating from the inner surface of a thick-walled functionally graded material (FGM) cylinder. The crack and the cylinder inner surfaces are subjected to. an internal pressure. The thermal eigenstrain induced in the cylinder material due to nonuniform coefficient of thermal expansion after cooling from the sintering temperature is taken into account. First, the FGM cylinder is homogenized by simulating its nonhomogeneous material properties by an equivalent eigenstrain, whereby the problem is reduced to the solution of a cracked homogenized cylinder with an induced thermal and an equivalent eigenstrains and under an internal pressure. Then, representing the cracks by a continuous distribution of edge dislocations and using their complex potential functions, generalized formulations are developed to calculate stress intensity factors for the cracks in the homogenized cylinder. The stress intensity factors calculated for the cracks in homogenized cylinder represents the stress intensity factors for the same cracks in the FGM cylinder. The application of the formulations are demonstrated for a thick-walled TiC/Al(2)2O(3) FGM cylinder and some numerical results of stress intensity factors are presented for different profiles of material distribution in the FGM cylinder. (C) 2006 Elsevier Ltd. All rights reserved.