Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting

Selective laser melting (SLM) offers significant potential for the manufacture of the advanced complex-shaped aluminium matrix composites (AMCs) used in the aerospace and automotive domains. Previous studies have indicated that advanced composite powders suitable for SLM include spherical powders with homogeneous reinforcement distribution, a particle size of <100 mu m and good flowability (Carr index < 15%); however, the production of such composite powders continues to be a challenge. Due to the intensive impacts of grinding balls, the high-energy ball-milling (HEBM) process has been employed to refine Al particles and disperse the nano Al2O3 reinforcements in the Al matrix to improve their mechanical properties. Notwithstanding, the specific characteristics of ball-milled powders for SLM and the effect of milling and pause duration on the fabrication of composite powders have not previously been investigated. The aim of this study was to synthesise Al-4 vol.% Al2O3 nano-composite powders using HEBM with two different types of milling and pause combinations. The characteristics of the powders subjected to up to 20 h of milling were investigated. The short milling (10 min) and long pause (15 min) combination provided a higher yield (66%) and narrower particle size distribution range than long milling (15 min) and a short pause (5 min). The nano Al2O3 reinforcements were observed to be dispersed uniformly after 20 h of milling, and the measured Carr index of 13.2% indicated that the ball milled powder offered good flowability. Vickers micro-hardness tests indicated that HEBM significantly improved the mechanical properties of the ball-milled powders. (C) 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).