Assessment Of Solid Particle Erosive Wear Of Glass Reinforced Epoxy Hybrid Composites Using Taguchi Approach

被引:0
作者
Suresh, J. S. [1 ]
Pramila, M. [2 ]
Sasidhar, M. [1 ]
机构
[1] Amrita Sai Inst Sci & Technol, Dept Mech Engn, Bathinapadu 521180, Andhra Pradesh, India
[2] Andhra Univ, Womens Engn Coll, Dept Mech Engn, Waltair 530003, Andhra Pradesh, India
关键词
Solid particle Erosion; Epoxy; Natural fillers (ACP/JCP/NCP); Taguchi Method;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Solid particle erosion of a material plays a vital role in diminishing of components, surface scratching, surface deprivation and reduction in purposeful life of the material structure. Hence erosion has been considered as a crucial role for many engineering application failures. This article presents analysis of erosion reaction of a glass reinforced epoxy composites with modified weight quantities of third phase filler materials like Arabic gum tree coal powder(A.C.P), Jambal tree coal powder(J.C.P) and Neem tree coal powders(N.C.P) which act as secondary reinforcement materials. Assessment of wear behaviour is carried out experimentally by an air jet erosion test rig and Taguchi method have been used. Taguchi method is well known technique, which provides a collective and effective approach for optimizing the design and experiments were followed by using Taguchi investigational design (L27 orthogonal array). Taguchi proposed experimental plan in terms of orthogonal array that gives different combinations of operational factors and their levels for each experiment. Selection of the experimental factors are the most important criteria in the design of experiments. Number of experimental arrangements are studied and significantly reduced by using orthogonal arrays. Finally, through experimentation has directed to determination of substantial process parameters and material variables that predominantly influence the wear rate of glass reinforced epoxy with modified weight proportions of third phase particulate fillers of Arabic tree coal powder(A.C.P), Jambal tree coal powder(J.C.P) and Neem tree coal powders(N.C.P) respectively. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码:342 / 349
页数:8
相关论文
共 11 条
[1]  
[Anonymous], J MAT SCI TECH
[2]   Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite [J].
Basavarajappa, S. ;
Chandramohan, G. ;
Mahadevan, Arjun ;
Thangavelu, Mukundan ;
Subramanian, R. ;
Gopalakrishnan, P. .
WEAR, 2007, 262 (7-8) :1007-1012
[3]  
Bitter J.G.A., 1963, WEAR, V6, P5, DOI [10.1016/0043-1648(63)90003-6, DOI 10.1016/0043-1648(63)90003-6, 10.1016/]
[4]   Study on friction and sliding wear behavior of woven S-glass fiber reinforced vinylester composites manufactured with different comonomers [J].
Chauhan, S. R. ;
Kumar, Anoop ;
Singh, I. .
JOURNAL OF MATERIALS SCIENCE, 2009, 44 (23) :6338-6347
[5]  
Chauhan SR., 2010, J Miner Mater Charact Eng, V9, P365
[6]   SOLID PARTICLE EROSION OF METALS - REMOVAL OF SURFACE MATERIAL BY SPHERICAL PROJECTILES [J].
HUTCHINGS, IM ;
WINTER, RE ;
FIELD, JE .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1976, 348 (1654) :379-&
[7]   Study on mechanical and erosion wear behavior of hybrid composites using Taguchi experimental design [J].
Mahapatra, S. S. ;
Patnaik, Amar .
MATERIALS & DESIGN, 2009, 30 (08) :2791-2801
[8]  
Muttineni Sasidhar, 2011, J INTELLIGENT COMPUT, V2, P111
[9]  
Roy K.R., 1990, PRIMER TAGUCHI METHO, V1st
[10]   MEASUREMENT OF SOLID PARTICLE VELOCITY IN EROSIVE WEAR [J].
RUFF, AW ;
IVES, LK .
WEAR, 1975, 35 (01) :195-199