Comparative study on the corrosion behavior of milled and unmilled magnesium by electrochemical impedance spectroscopy

The corrosion behavior of milled Mg prepared by high-energy ball milling for 10 h has been investigated in alkaline solutions by electrochemical impedance spectroscopy and compared with that of unmilled Mg. X-ray powder diffraction indicates a crystallite size of 34 mn for the milled Mg cornpared to >100 nm for the unmilled powder. Chemical analyses show no significant iron contamination in milled Mg powder, indicating the absence of tools erosion during the milling procedure. In contrast, significant MgO enrichment in the milled powder is observed (6.5 wt.% after 10 h milling compared to 1.0 wt.% before milling). The oxygen contamination is mainly attributed to the powder oxidation occurring during milling. From XPS analyses, no MgO enrichment is detected on milled Mg electrode surface, confirming that MgO is dispersed homogeneously in the bulk of the material rather than to segregate on its surface. Electrochemical impedance spectroscopy demonstrates clearly the better corrosion resistance of milled Mg compared to unmilled Mg in passive conditions (KOH solution, pH = 14) and in more active corrosion conditions (borate solution, pH = 8.4). This is illustrated by a nobler corrosion potential and by a significant increase of the interfacial resistance related to the film and charge-transfer reaction. Moreover, the variation of the different electrochemical parameters (corrosion potential, interfacial resistance and capacitance) with immersion time is less accentuated and tends more rapidly to a steady state with milled Mg, suggesting an enhancement of the Mg(OH)(2) formation kinetic. The origin of the distinctive passivation behavior of ball-milled Mg is discussed. (C) 2004 Elsevier Ltd. All rights reserved.