Effect of initial grain orientation on evolution of deformed microstructure in hot compressed Ni-30Fe alloy

被引：7

作者：

Cho, JY ^{[1
]}

Inoue, T

Yin, FX

Nagai, K

机构：

[1] Natl Inst Mat Sci, Steel Res Ctr, Tsukuba, Ibaraki 3050047, Japan

[2] Seoul Natl Univ, Sch Mat Sci & Engn, Seoul 151742, South Korea

来源：

MATERIALS TRANSACTIONS | 2004年 / 45卷 / 10期

关键词：

nickel-30 ferrous alloy; shear band; hot deformation; electron back-scattering diffraction pattern; Goss orientation;

D O I：

10.2320/matertrans.45.2960

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An experimental procedure has been developed to investigate systematically the effect of initial grain orientation on the evolution of deformed microstructure in Ni-30Fe alloy. The investigation of identical grains before and after hot deformation made it possible to trace the evolution of microstructure deformed up to 50% at a strain rate of 1/s in a single pass at 1023 K using a hot compression simulator. The localized inhomogeneous shear bands occurred in almost all grains. On the other hand, the near {110}<001> grains have undergone fairly homogeneous deformation even after a high equivalent plastic strain of 1.9.

引用

页码：2960 / 2965

页数：6

共 20 条

[1]

ADACHI Y, 1999, CAMP ISIJ, V12, P1123

[2] Grain refinement under multiple warm deformation in 304 type austenitic stainless steel [J].

Belyakov, A ;

Sakai, T ;

Miura, H ;

Kaibyshev, R .

ISIJ INTERNATIONAL, 1999, 39 (06) :592-599

[3]

CHRANOCK W, 1967, MET SCI J, V1, P123

[4] Influence of deformation variables on the formation of copper-type shear bands in Al-lMg [J].

Duckham, A ;

Knutsen, RD ;

Engler, O .

ACTA MATERIALIA, 2001, 49 (14) :2739-2749

[5] Discontinuous subgrain growth in deformed and annealed {110}<001> aluminium single crystals [J].

Ferry, M ;

Humphreys, FJ .

ACTA MATERIALIA, 1996, 44 (04) :1293-1308

[6] New discoveries in deformed metals [J].

Hansen, N .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (12) :2917-2935

[7] The production of ultrafine ferrite in low-carbon steel by strain-induced transformation [J].

Hickson, MR ;

Hurley, PJ ;

Gibbs, RK ;

Kelly, GL ;

Hodgson, PD .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (04) :1019-1026

[8] MECHANISM OF DEFORMATION AND DEVELOPMENT OF ROLLING TEXTURES IN POLYCRYSTALLINE FCC METALS .2. SIMULATION AND INTERPRETATION OF EXPERIMENTS ON THE BASIS OF TAYLOR-TYPE THEORIES [J].

HIRSCH, J ;

LUCKE, K .

ACTA METALLURGICA, 1988, 36 (11) :2883-2904

[9] Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling [J].

Hurley, PJ ;

Muddle, BC ;

Hodgson, PD .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (06) :1507-1517

[10] Comparison of the deformation characteristics of a Ni-30wt% Fe alloy and plain carbon steel [J].

Hurley, PJ ;

Muddle, BC ;

Hodgson, PD ;

Davies, CHJ ;

Wynne, BP ;

Cizek, P ;

Hickson, MR .

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MICROALLOYING IN STEELS, 1998, 284-2 :159-166

← 1 2 →