Digital light processing 3D printing of AlSi10Mg powder modified by surface coating

被引：23
作者：
Zhang, Yubei [1 ,2 ]
Li, Shan [1 ]
Zhao, Yantong [1 ,2 ]
Duan, Wenyan [1 ]
Liu, Bingshan [1 ]
Wang, Tongcai [1 ]
Wang, Gong [1 ,2 ]
机构：
[1] Chinese Acad Sci, Technol & Engn Ctr Space Utilizat, Key Lab Space Mfg Technol SMT, Beijing 100094, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
来源：
ADDITIVE MANUFACTURING | 2021年 / 39卷
基金：
中国国家自然科学基金;
关键词：
Additive manufacturing; Digital light processing; AlSi10Mg; Surface modification; Suspension polymerization;
D O I：
10.1016/j.addma.2021.101897
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper proposed a kind of aluminum alloy powder additive manufacturing technology through surface modification of AlSi10Mg particles and digital light processing (DLP) printing. Firstly, AlSi10Mg particles were coated by styrene through suspension polymerization. The TEM results showed that the coating thickness is approximately 200 nm to 400 nm. Secondly, printing slurry was prepared by mixing photocurable acrylate resin with AlSil0Mg powder. The printing experiments showed that the curing depth of the printing slurry was obviously improved after surface coating of AlSil0Mg power. And the reason was discussed in detail. Then, the photocuring behavior and viscosity of the printing slurry were tested and analyzed. Finally, complex structures of AlSil0Mg material were successfully fabricated by digital light processing. It is demonstrated that surface modification is a feasible method for the photocurable printing of ultrafine alloy powder, which can also be expanded to the additive manufacturing of other alloy systems.
引用
收藏
页数：9
相关论文
共 50 条
  • [41] Digital Light Processing Route for 3D Printing of Acrylate-Modified PLA/Lignin Blends: Microstructure and Mechanical Performance
    Guessasma, Sofiane
    Stephant, Nicolas
    Durand, Sylvie
    Belhabib, Sofiane
    POLYMERS, 2024, 16 (10)
  • [42] Process Optimization for Up-Facing Surface Finish of AlSi10Mg Alloy Produced by Laser Powder Bed Fusion
    Gao, Chaofeng
    Tang, Huaping
    Zhang, Shiheng
    Ma, Zhibo
    Bi, Yunjie
    Rao, Jeremy-Heng
    METALS, 2022, 12 (12)
  • [43] Critical damage events of 3D printed AlSi10Mg alloy via in situ synchrotron X-ray tomography
    Wu, Zhengkai
    Wu, Shengchuan
    Kruzic, Jamie J.
    Hu, Yanan
    Yu, Huan
    Zhang, Xingxing
    Li, Xiaopeng
    Wang, Qingyuan
    Kang, Guozheng
    Withers, Philip J.
    ACTA MATERIALIA, 2025, 282
  • [44] Two-Step Post-processing Treatment to Improve Additive Manufactured AlSi10Mg Surface Finish
    Huang, Yinsong
    Tan, Yong Teck
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON ADVANCED SURFACE ENHANCEMENT, INCASE 2023, 2024, : 391 - 398
  • [45] 3D printing of zirconia via digital light processing: optimization of slurry and debinding process
    Sun, Jinxing
    Binner, Jon
    Bai, Jiaming
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (15) : 5837 - 5844
  • [46] The Fabrication of Micro Beam from Photopolymer by Digital Light Processing 3D Printing Technology
    Ertugrul, Ishak
    MICROMACHINES, 2020, 11 (05)
  • [47] Printability of External and Internal Structures Based on Digital Light Processing 3D Printing Technique
    Yang, Yan
    Zhou, Yanjun
    Lin, Xiao
    Yang, Qingliang
    Yang, Gengshen
    PHARMACEUTICS, 2020, 12 (03)
  • [48] 3D Printing Tannic Acid-Based Gels via Digital Light Processing
    Li, Ning
    Xiang, Zuojia
    Rong, Youjie
    Zhu, Lisheng
    Huang, Xiaobo
    MACROMOLECULAR BIOSCIENCE, 2022, 22 (04)
  • [49] Digital Light-Processing (DLP) 3D Printing of Magnesium Phosphate Minerals and Cements
    Holeczek, Katharina
    Gbureck, Uwe
    Jungst, Tomasz
    Gergely, Csaba
    Galaba, Lisa
    Kade, Juliane C.
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (08)
  • [50] Corrosion-Fatigue Performance of 3D-Printed (L-PBF) AlSi10Mg
    Linder, Clara
    Vucko, Flavien
    Ma, Taoran
    Proper, Sebastian
    Dartfeldt, Erik
    MATERIALS, 2023, 16 (17)
12345