Digital light processing 3D printing of AlSi10Mg powder modified by surface coating

被引：23
|
作者：
Zhang, Yubei [1 ,2 ]
Li, Shan [1 ]
Zhao, Yantong [1 ,2 ]
Duan, Wenyan [1 ]
Liu, Bingshan [1 ]
Wang, Tongcai [1 ]
Wang, Gong [1 ,2 ]
机构：
[1] Chinese Acad Sci, Technol & Engn Ctr Space Utilizat, Key Lab Space Mfg Technol SMT, Beijing 100094, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
来源：
ADDITIVE MANUFACTURING | 2021年 / 39卷
基金：
中国国家自然科学基金;
关键词：
Additive manufacturing; Digital light processing; AlSi10Mg; Surface modification; Suspension polymerization;
D O I：
10.1016/j.addma.2021.101897
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper proposed a kind of aluminum alloy powder additive manufacturing technology through surface modification of AlSi10Mg particles and digital light processing (DLP) printing. Firstly, AlSi10Mg particles were coated by styrene through suspension polymerization. The TEM results showed that the coating thickness is approximately 200 nm to 400 nm. Secondly, printing slurry was prepared by mixing photocurable acrylate resin with AlSil0Mg powder. The printing experiments showed that the curing depth of the printing slurry was obviously improved after surface coating of AlSil0Mg power. And the reason was discussed in detail. Then, the photocuring behavior and viscosity of the printing slurry were tested and analyzed. Finally, complex structures of AlSil0Mg material were successfully fabricated by digital light processing. It is demonstrated that surface modification is a feasible method for the photocurable printing of ultrafine alloy powder, which can also be expanded to the additive manufacturing of other alloy systems.
引用
收藏
页数：9
相关论文
共 50 条
  • [31] Pixel-Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing
    Montgomery, S. Macrae
    Demoly, Frederic
    Zhou, Kun
    Qi, H. Jerry
    ADVANCED FUNCTIONAL MATERIALS, 2023, 33 (17)
  • [32] Post-Processing Effects on Surface Properties of Direct Metal Laser Sintered AlSi10Mg Parts
    Binnur Sagbas
    Metals and Materials International, 2020, 26 : 143 - 153
  • [33] Fatigue response of AlSi10Mg by laser powder bed fusion: influence of build orientation, heat, and surface treatments
    Fini, S.
    Croccolo, D.
    De Agostinis, M.
    Olmi, G.
    Paiardini, L.
    Scapecchi, C.
    Mele, M.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (02) : 1385 - 1403
  • [34] Experimental Study on Circular Overhang Circularity and Surface Quality in AlSi10Mg Manufactured by Laser Powder Bed Fusion
    Kiass, El-Mehdi
    Bouabbou, Abdelkrim
    Mohammed, Zakaria
    Zarbane, Khalid
    Beidouri, Zitouni
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [35] Digital light processing based multimaterial 3D printing: challenges, solutions and perspectives
    Cheng, Jianxiang
    Yu, Shouyi
    Wang, Rong
    Ge, Qi
    INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING, 2024, 6 (04)
  • [36] Digital light processing 3D printing of molecularly imprinted polymers for antibiotic removal
    Camilli, Elena
    Bertana, Valentina
    Frascella, Francesca
    Cocuzza, Matteo
    Marasso, Simone Luigi
    Roppolo, Ignazio
    REACTIVE & FUNCTIONAL POLYMERS, 2025, 208
  • [37] 3D printing of fully cellulose-based hydrogels by digital light processing
    Cafiso, Diana
    Septevani, Athanasia Amanda
    Noe, Camilla
    Schiller, Tara
    Pirri, Candido Fabrizio
    Roppolo, Ignazio
    Chiappone, Annalisa
    SUSTAINABLE MATERIALS AND TECHNOLOGIES, 2022, 32
  • [38] Multi-Color 3D Printing via Single-Vat Grayscale Digital Light Processing
    Peng, Xirui
    Yue, Liang
    Liang, Sizhuang
    Montgomery, Stuart
    Lu, Chunliang
    Cheng, Chieh-Min
    Beyah, Raheem
    Zhao, Ruike Renee
    Qi, H. Jerry
    ADVANCED FUNCTIONAL MATERIALS, 2022, 32 (28)
  • [39] Effect of Hirtisation treatment on surface quality and mechanical properties of AlSi10Mg samples produced by laser powder bed fusion
    Beevers, Emilie
    Neumayer, Dominic
    Bonvoisin, Benoit
    Branda, Ana
    Hansal, Selma
    Doppler, Michael
    Rohr, Thomas
    Van Hooreweder, Brecht
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [40] Preparation of Ti6Al4V Slurry for Digital Light Processing 3D Printing
    Zhang, Jinshuai
    Guo, Nana
    Li, Ling
    Zhao, Junhui
    Chu, Wei
    Zhao, Jie
    ADVANCED ENGINEERING MATERIALS, 2025, 27 (02)
12345