Comparison of Mechanical Properties for Polymer Concrete with Different Types of Filler

被引：89

作者：

Barbuta, Marinela ^{[1
]}

Harja, Maria ^{[2
]}

Baran, Irina ^{[1
]}

机构：

[1] Tech Univ Gh Asachi Iasi, Fac Civil Engn, Iasi 700050, Romania

[2] Tech Univ Gh Asachi Iasi, Fac Chem Engn, Iasi 700050, Romania

来源：

JOURNAL OF MATERIALS IN CIVIL ENGINEERING | 2010年 / 22卷 / 07期

关键词：

Silica fume; COAL FLY-ASH; FRACTURE PROPERTIES; BOND BEHAVIOR;

D O I：

10.1061/(ASCE)MT.1943-5533.0000069

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Sustained research and development work on the utilization of waste (fly ash and silica fume) for various productive uses have been carried out. In the construction industry, major attention has been devoted to the use of fly ash and silica fume in concrete as addition to or as cement replacement. The utilization of a solid waste, fly ash and silica fume, in polymer concrete was reported in this paper including the effects on the compressive strength, flexural strength, and split tensile strength. The results show the influence of fly ash and silica fume content on the mechanical properties of polymer concrete with epoxy resin. The fillers improved the mechanical characteristics of polymer concrete compared to that of polymer concrete without filler: the compressive strength of polymer concrete with fly ash content was favorably influenced by the filler compound to polymer concrete with silica fume.

引用

页码：696 / 701

页数：6

共 31 条

[11] DENVER JSJ, 2007, J HAZARD MAT A, V139, P506
[12] Characterization of coal fly ash for possible utilization in glass production
Erol, M.
Kucukbayrak, S.
Ersoy-Mericboyu, A.
[J]. FUEL, 2007, 86 (5-6) : 706 - 714
[13] Feuzicana de Souza Almeida AE, 2006, MAT RES, V9, P1
[14] Polymers in concrete: a vision for the 21st century
Fowler, DW
[J]. CEMENT & CONCRETE COMPOSITES, 1999, 21 (5-6) : 449 - 452
[15] Utilization of coal fly ash from power plants - I. Ash characterization
Harja, Maria
Barbuta, Marinela
Rusu, Lacramioara
Apostolescu, Nicolae
[J]. ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, 2008, 7 (03): : 289 - 293
[16] Mechanism of geopolymerization and factors influencing its development: a review
Khale, Divya
Chaudhary, Rubina
[J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (03) : 729 - 746
[17] Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments
Muthukumar, M
Mohan, D
Rajendran, M
[J]. CEMENT & CONCRETE COMPOSITES, 2003, 25 (07) : 751 - 758
[18] Polymer-based materials for repair and improved durability: Japanese experience
Ohama, Y
[J]. CONSTRUCTION AND BUILDING MATERIALS, 1996, 10 (01) : 77 - 82
[19] PARDO A, 1995, 7 INT C POL CONCR IC, P199
[20] RAMIREZ JL, 2001, P 10 INT C POL CONCR

← 1 2 3 4 →