Effect of Sub-rapid Solidification and Secondary Cooling on Microstructure and Properties of Strip Cast Low-Carbon Bainitic-Martensitic Steel

被引：17

作者：

Lyu, Peisheng ^{[1
,2
]}

Wang, Wanlin ^{[1
,2
]}

Wang, Chonghao ^{[1
]}

Zhou, Lejun ^{[1
,2
]}

Fang, Yuan ^{[3
]}

Wu, Jianchun ^{[3
]}

机构：

[1] Cent South Univ, Sch Met & Environm, Changsha 410083, Hunan, Peoples R China

[2] Cent South Univ, Natl Ctr Int Res Clean Met, Changsha 410083, Hunan, Peoples R China

[3] Baoshan Iron & Steel Co Ltd, Res Inst, Shanghai 201999, Peoples R China

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2021年 / 52卷 / 09期

基金：

美国国家科学基金会;

关键词：

MECHANICAL-PROPERTIES; STATIC RECRYSTALLIZATION; YIELD STRENGTH; COPPER SULFIDE; PRECIPITATION; TEXTURE; TEMPERATURE; AUSTENITE; VANADIUM; PROGRESS;

D O I：

10.1007/s11661-021-06356-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The low-carbon bainitic-martensitic steel added with microalloying elements was designed, and samples with different cooling rates were produced through ingot casting and simulated strip casting. The ingot cast presented a multiphase microstructure constituted of allotriomorphic ferrite, polygonal ferrite, acicular ferrite and pearlite. The air-cooled strip consisted of polygonal ferrite, acicular ferrite and bainite ferrite, and the gas-cooled strip was composed of acicular ferrite, bainite ferrite and martensite. The results indicated that the duplex sulfide-oxide particles were firstly formed during solidification and refined by the high solidification rate during strip casting; the embedded structure of copper sulfide in duplex particles suggested that the copper sulfide precipitated from the liquid oxide. Independent copper sulfides with an average diameter of similar to 80 nm were formed in the ingot cast and a large number of nanoscale carbides or nitrides less than 25 nm was also observed. However, independent copper sulfides and nanoscale precipitates were hardly observed in the gas-cooled strip cast. For the air-cooled strip cast, only a small number of the nanoscale precipitates were observed. Vickers hardness, yield strength (YS) and ultimate tensile strength (UTS) increased with the fraction of bainite ferrite and martensite, in which the gas-cooled strip showed the highest YS and UTS, and the ingot cast presented the highest total elongation (TE). Nevertheless, the gas-cooled strip showed the best toughness due to the highest product of UTS and TE. [GRAPHICS] .

引用

页码：3945 / 3960

页数：16

共 47 条

[1]

ANDREWS KW, 1965, J IRON STEEL I, V203, P721

[2] The Effect of Nb on the Continuous Cooling Transformation Curves of Ultra-Thin Strip CASTRIP(C) Steels [J].

Carpenter, Kristin R. ;

Killmore, Chris R. .

METALS, 2015, 5 (04) :1857-1877

[3] Complex precipitation phenomena in strip cast steels with high sulfur and copper contents [J].

Dorin, T. ;

Taylor, A. ;

Wood, K. ;

Wang, J. ;

Hodgson, P. D. ;

Stanford, N. .

JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2016, 49 :1777-1785

[4] Quantitative examination of carbide and sulphide precipitates in chemically complex steels processed by direct strip casting [J].

Dorin, Thomas ;

Wood, Kathleen ;

Taylor, Adam ;

Hodgson, Peter ;

Stanford, Nicole .

MATERIALS CHARACTERIZATION, 2016, 112 :259-268

[5] Effect of Cooling Rate on Phase Transformations in a High-Strength Low-Alloy Steel Studied from the Liquid Phase [J].

Dorin, Thomas ;

Stanford, Nicole ;

Taylor, Adam ;

Hodgson, Peter .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (12) :5561-5571

[6]

Ferry M., 2006, WOODHEAD MATERIALS

[7] Scaling theory of the Hall-Petch relation for multilayers [J].

Friedman, LH ;

Chrzan, DC .

PHYSICAL REVIEW LETTERS, 1998, 81 (13) :2715-2718

[8] Progress in Strip Casting Technologies for Steel; Technical Developments [J].

Ge, Sa ;

Isac, Mihaiela ;

Guthrie, Roderick Ian Lawrence .

ISIJ INTERNATIONAL, 2013, 53 (05) :729-742

[9] Progress of Strip Casting Technology for Steel; Historical Developments [J].

Ge, Sa ;

Isac, Mihaiela ;

Guthrie, Roderick Ian Lawrence .

ISIJ INTERNATIONAL, 2012, 52 (12) :2109-2122

[10] Effect of hot rolling temperature on grain size and precipitation hardening in a Ti-microalloyed low-carbon martensitic steel [J].

Han, Y. ;

Shi, J. ;

Xu, L. ;

Cao, W. Q. ;

Dong, H. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 553 :192-199

← 1 2 3 4 5 →