Study on thermal stability of CrTiAlN coating for dry drilling

被引：36
作者：
Bai, Lijing
Zhu, Xiaodong
Xiao, Jiming
He, Jiawen [1 ]
机构：
[1] Xian Jiaotong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China
[2] Xian Univ Technol, Sch Mat Sci & Engn, Xian 710048, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2007年 / 201卷 / 9-11期
关键词：
CrTiAlN coating; cutting ability; microstructure; thermal stability;
D O I：
10.1016/j.surfcoat.2006.07.166
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present paper is emphasized on the effect of thermal stability of the coating for dry drilling. The comparison of CrTiAlN and TiN coated drills as well as bare drill indicates that besides appreciable hardness, thermal stability is a crucial factor. The microstructure and mechanical properties after annealing at different temperatures were investigated. The results show that when the hardness is similar, the high oxidation resistance of the coating with good thermal stability at elevated temperature (in morphology, microstructure or phase) will exhibit good performance for dry cutting. The higher the hardness of the work piece, the more pronounced effect of the thermal stability of the coating layer. (C) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：5257 / 5260
页数：4
相关论文
共 14 条
[1]  
BENIEN H, 1991, MAT SCI ENG A1, V39, P126
[2]   A study of the wear mechanisms of Ti1-xAlxN and Ti1-x-yAlxCryN coated high-speed steel twist drills under dry machining conditions [J].
Harris, SG ;
Doyle, ED ;
Vlasveld, AC ;
Audy, J ;
Quick, D .
WEAR, 2003, 254 (7-8) :723-734
[3]   Dry machining - commercial viability through filtered arc vapour deposited coatings [J].
Harris, SG ;
Vlasveld, AC ;
Doyle, ED ;
Dolder, PJ .
SURFACE & COATINGS TECHNOLOGY, 2000, 133 :383-388
[4]   Nitrided layer embrittlement due to edge effect on duplex treated AISI M2 high-speed steel [J].
Kwietniewski, C ;
Fontana, W ;
Moraes, C ;
Rocha, AD ;
Hirsch, T ;
Reguly, A .
SURFACE & COATINGS TECHNOLOGY, 2004, 179 (01) :27-32
[5]   Effects of Al-2lTi-23Cr coatings on oxidation and mechanical properties of TiAl alloy [J].
Lee, JK ;
Lee, HN ;
Lee, HK ;
Oh, MH ;
Wee, DM .
SURFACE & COATINGS TECHNOLOGY, 2002, 155 (01) :59-66
[6]  
LUGSCHEIDER E, 1997, SURF COAT TECH, V90, P127
[7]   Recent developments in cutting tool materials [J].
Mills, B .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 56 (1-4) :16-23
[8]  
NAKAYAMA I, 1985, THEORETIC METAL CUTT, P59
[9]   Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering [J].
Rebholz, C ;
Ziegele, H ;
Leyland, A ;
Matthews, A .
SURFACE & COATINGS TECHNOLOGY, 1999, 115 (2-3) :222-229
[10]   PVD-coatings for wear protection in dry cutting operations [J].
Tonshoff, HK ;
Mohlfeld, A .
SURFACE & COATINGS TECHNOLOGY, 1997, 93 (01) :88-92
12