Long-range BOTDA sensor over 50 km distance employing pre-pumped Simplex coding

We propose and demonstrate a long-range Brillouin optical time-domain analysis (BOTDA) sensor based on the pre-pumped Simplex coding technique. This approach combines Simplex coding with the pulse pre-pump technique, which takes full advantage of the signal-to-noise ratio enhancement provided by optical pulse coding and achieves meter-scale spatial resolution with an unbroadened Brillouin gain spectrum by the use of pre-pumped short pump pulse. Compared to the widely used differential pulse-width pair technique, a comparable performance can be realized while the measurement time is reduced by half. The theoretical analysis of pre-pumped Simplex coding applied to BOTDA systems is presented and a proof-of-concept experiment is carried out along a similar to 51 km single-mode fiber composed of two fiber segments with slightly different Brillouin frequency shift values. With the proposed technique, Brillouin frequency shifts of the two different fiber sections at the end of the sensing fiber are clearly distinguished, and the obtained spatial resolution and temperature/strain accuracy along the sensing fiber are respectively 1 m and 0.4 degrees C/8 mu epsilon. According to the experimental results, we believe that the BOTDA employing pre-pumped Simplex coding is able to realize extra-long distance sensing without Raman amplification, while keeping a high spatial resolution and measurement accuracy.