Realization of Industry 4.0 with high speed CT in high volume production

被引：22

作者：

Bauza, Marcin B. ^{[1
]}

Tenboer, Jason ^{[1
]}

Li, Ming ^{[1
]}

Lisovich, Aleksandr ^{[1
]}

Zhou, Jian ^{[1
]}

Pratt, Daniel ^{[1
]}

Edwards, Jonathan ^{[1
]}

Zhang, Hai ^{[1
]}

Turch, Charles ^{[1
]}

Knebel, Richard ^{[1
]}

机构：

[1] Carl Zeiss Ind Metrol LLC, Maple Grove, MN 55369 USA

来源：

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2018年 / 22卷

关键词：

Industry; 4.0; Computed tomography; High speed inspection; Metrology; Additive manufacturing; COMPUTED-TOMOGRAPHY; ACCURACY;

D O I：

10.1016/j.cirpj.2018.04.001

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Industry 4.0 is taking process information to the next level with improved exchange of data, analytics and relevant feedback regarding the process, equipment health and dynamics. Quality Control needs to adapt to new requirements of 100% inspection and additive manufacturing (AM) to enable high-speed inspection of internal and external features, rapidly accommodate part design changes, tie results to unique part numbers, perform automated metrology and make a final decision on the condition of a measured part. All of this must happen at a rapid pace, permitting inspection of internal and external features simultaneously. Computed tomography (CT) offers needed flexibility and, with recent technological advancement, part throughput of a few seconds is possible, even while performing complex metrology and inspection tasks simultaneously. With defect analysis and feedback, virtually defect-free production is achievable. In this paper, authors will discuss implementation of complete solutions enabling greater process control, digital part tracking as well as flexibility and throughput of parallel metrology with industrial CT. (C) 2018 CIRP.

引用

页码：121 / 125

页数：5

共 19 条

[1] Comparison on Computed Tomography using industrial items [J].

Angel, J. ;

De Chiffre, L. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2014, 63 (01) :473-476

[2] Enhancement and proof of accuracy of industrial computed tomography (CT) measurements [J].

Bartscher, M. ;

Hilpert, U. ;

Goebbels, J. ;

Weidemann, G. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (01) :495-498

[3] Materials for additive manufacturing [J].

Bourell, David ;

Kruth, Jean Pierre ;

Leu, Ming ;

Levy, Gideon ;

Rosen, David ;

Beese, Allison M. ;

Clare, Adam .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2017, 66 (02) :659-681

[4]

Brettel M., 2014, INT J INFORM COMMUNI, V8

[5] Testing of x-ray microtomography systems using a traceable geometrical standard [J].

Carmignato, S. ;

Dreossi, D. ;

Mancini, L. ;

Marinello, F. ;

Tromba, G. ;

Savio, E. .

MEASUREMENT SCIENCE AND TECHNOLOGY, 2009, 20 (08)

[6]

Carmignato S., 2018, Industrial X-ray Computed Tomography

[7] Accuracy of industrial computed tomography measurements: Experimental results from an international comparison [J].

Carmignato, Simone .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2012, 61 (01) :491-494

[8] Uncertainty determination and quantification for dimensional measurements with industrial computed tomography [J].

Dewulf, Wim ;

Kiekens, Kim ;

Tan, Ye ;

Welkenhuyzen, Frank ;

Kruth, Jean-Pierre .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2013, 62 (01) :535-538

[9]

Hermann M, 2016, SYST SCI HICSS 49 HA

[10] Reconfigurable manufacturing systems [J].

Koren, Y ;

Heisel, U ;

Jovane, F ;

Moriwaki, T ;

Pritschow, G ;

Ulsoy, G ;

Van Brussel, H .

CIRP ANNALS 1999: MANUFACTURING TECHNOLOGY, VOL 48 NO 2 1999, 1999, :527-540

← 1 2 →