Effect of soft Bi particles on grain refinement during severe plastic deformation

被引：8
|
作者：
Jia, Hai-long [1 ]
Marthinsen, K. [1 ]
Li, Yan-jun [1 ]
机构：
[1] Norwegian Univ Sci & Technol, Dept Mat Sci & Engn, N-7491 Trondheim, Norway
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2017年 / 27卷 / 05期
关键词：
Al alloys; equal channel angular pressing (ECAP); Bi particle; grain refinement; hardness; TRANSIENT DIRECTIONAL SOLIDIFICATION; MONOTECTIC AL-BI; IMMISCIBLE ALLOYS; ALUMINUM-ALLOYS; EVOLUTION; RECRYSTALLIZATION; MICROSTRUCTURE; MECHANISMS;
D O I：
10.1016/S1003-6326(17)60114-6
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Two aluminum alloys, Al-8Zn and Al-6Bi-8Zn were subjected to equal channel angular pressing (ECAP) up to 5 passes at room temperature. The microstructural evolution and the grain refinement behavior of these alloys were systematically studied by electron backscatter diffraction (EBSD). After 5 passes of ECAP, ultrafine grained microstructures formed in both alloys. However, the grain structure in the Al-6Bi-8Zn alloy is much finer than that of Al-8Zn alloy, showing that the soft Bi particles have a strong influence on enhancing the grain refinement during ECAP. The strengths of the ECAP-processed materials were measured by hardness test and it showed that after 5 passes of ECAP, the hardness of the Al-6Bi-8Zn alloy was higher than that of the Al-8Zn alloy. The effects of soft Bi particles on the deformation behavior during ECAP and the final strength of the Al-6Bi-8Zn alloy were discussed.
引用
收藏
页码：971 / 976
页数：6
相关论文
共 50 条
  • [31] A Novel Severe Plastic Deformation Process for Shear Deformation and Grain Refinement of Bulk Materials
    Montazeri-Pour, Mehdi
    Habibi-Parsa, Mohammad
    ULTRAFINE GRAINED AND NANO-STRUCTURED MATERIALS IV, 2014, 829 : 15 - 19
  • [32] Grain size saturation during severe plastic deformation
    Tsuji, Nobuhiro
    Kamikawa, Naoya
    Li, Bolong
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 2837 - +
  • [33] On the mechanism of grain subdivision during severe plastic deformation
    Romanov, AE
    Orlova, TS
    Enikeev, NA
    Nazarov, AA
    Alexandrov, IV
    Valiev, RZ
    ULTRAFINE GRAINED MATERIALS III, 2004, : 211 - 216
  • [34] The effect of geometrically necessary dislocations on grain refinement during severe plastic deformation and subsequent annealing of Al-7% Si
    Morris, M. A. Munoz
    Gutierrez-Urrutia, I.
    Morris, D. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 493 (1-2): : 141 - 147
  • [35] Grain Refinement of Magnesium Alloys by CONFORM: A Continuous Severe Plastic Deformation Route?
    He, Youliang
    Geo, Fei
    Song, Baoyun
    Fu, Rong
    Wu, Guiming
    Li, Jian
    Jiang, Lan
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 1781 - +
  • [36] Severe plastic deformation: new technique for powder consolidation and grain size refinement
    Alexandrov, IV
    Zhu, YT
    Lowe, TC
    Valiev, RZ
    POWDER METALLURGY, 1998, 41 (01) : 11 - 13
  • [37] Effect of grain refinement of magnesium alloy AZ31 by severe plastic deformation on material characteristics
    Kang, S. H.
    Lee, Y. S.
    Lee, J. H.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 201 (1-3) : 436 - 440
  • [38] The limits of refinement by severe plastic deformation
    Pippan, Reinhard
    Wetscher, Florian
    Hafok, Martin
    Vorhauer, Andreas
    Sabirov, Ishaf
    ADVANCED ENGINEERING MATERIALS, 2006, 8 (11) : 1046 - 1056
  • [39] Plastic Flow and Grain Refinement Under Simple Shear-Based Severe Plastic Deformation Processing
    Orlov, D.
    Todaka, Y.
    Umemoto, M.
    Beygelzimer, Y.
    Horita, Z.
    Tsuji, N.
    RECENT DEVELOPMENTS IN THE PROCESSING AND APPLICATIONS OF STRUCTURAL METALS AND ALLOYS, 2009, 604-605 : 171 - +
  • [40] Effect of Grain Shape on Texture Formation during Severe Plastic Deformation of Pure Copper
    Jahedi, Mohammad
    Beyerlein, Irene J.
    Paydar, Mohammad Hossein
    Knezevic, Marko
    ADVANCED ENGINEERING MATERIALS, 2018, 20 (04)
12345