Investigation of Exfoliation Efficiency of 6H-SiC Implanted Sequentially with He+ and H2+ Ions

Silicon carbide (SiC) is a promising material used in the advanced semiconductor industry. Fabricating SiC-on-insulator via H implantation is a good method. He and H co-implantation into Si can efficiently enhance exfoliation efficiency compared to only H implantation. In this study, 6H-SiC single crystals were implanted with He+ and H-2(+) dual beams at room temperature, followed by annealing at 1100 degrees C for 15 min, and irradiations with 60 keV He ions with a fluence of 1.5 x 10(16) ions/cm(-2) or 5.0 x 10(16) ions/cm(-2) and 100 keV H-2(+) ions with a fluence of 5 x 10(16) ions/cm(-2) were carried out. The lattice disorder was characterized by both Raman spectroscopy and transmission electron microscopy. The intensity of Raman peaks decreased with increasing fluence. No Raman shift or new phases were found. A very high numerical density of bubbles was observed as compared to single H or He implantation. Moreover, stacking faults, Frank loops and tangled dislocations were formed in the damaged layer. Surface exfoliation was inhibited by co-implantation. A possible reason for this is an increase in fracture toughness and a decrease in elastic out-of-plane strain due to dense bubbles and stacking faults.