Calculation of dryout and post-dryout heat transfer for tube geometry

被引：74

作者：

Hoyer, N ^{[1
]}

机构：

[1] Scandpower AS, Nucl Engn, N-2007 Kjeller, Norway

来源：

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW | 1998年 / 24卷 / 02期

关键词：

annular flow; dryout model; post-dryout heat transfer;

D O I：

10.1016/S0301-9322(97)00057-8

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A method for calculating dryout power and post-dryout heat transfer in tube geometry is described and validation results are presented. A two-phase, three-field annular flow model is utilized, which bases dryout on the criterion of a disappearing liquid film at the wall. Entrainment and deposition are key phenomena and have to be adequately modelled, including the effect of wall heat flux. The calculational method is tested in the framework of the MONA code and validated against the KTH dryout experiments. The model generally provides good results for dryout position and power, and successfully takes account of variations in tube diameter, pressure, and mass and heat flux. The model predicts the effect of a varying axial heat-flux distribution especially well, as mechanisms like heat flux induced entrainment and deposition inhibition through film evaporation are accounted for. Also post-dryout heat transfer predictions agree well with little systematic deviation and correct shapes of the temperature profiles. (C) 1998 Elsevier Science Ltd. All rights reserved.

引用

页码：319 / 334

页数：16

共 29 条

[11]

DALLMAN JC, 1979, 2 PHASE MOMENTUM HEA

[12]

Dittus F.W., 1930, University of California Publications in Engineering, V2, P443, DOI [10.1016/0735-1933(85)90003-X, DOI 10.1016/0735-1933(85)90003-X]

[13]

Govan A, 1990, THESIS U LONDON

[14]

HADALLER G, 1969, WDI147 AT EN CAN LTD

[15]

HEINEMAN JB, 1960, ANL6213

[16]

Hewitt G.F, 1974, HEAT TRANSF

[17]

HOYER N, 1995, P INT S 2 PHAS FLOW, V2, P943

[18]

HOYER N, 1994, P INT C NEW TRENDS N, V1, P271

[19]

Ishii M., 1977, ONE DIMENSIONAL DRIF

[20] CRITICAL HEAT-FLUX [J].

KATTO, Y .

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 1994, 20 :53-90

← 1 2 3 →