Research on the mechanical and thermal properties of MWCNTs/CF reinforced epoxy resin matrix composite patch

被引:7
|
作者
Song, W. [1 ]
Li, C. Q. [1 ]
Lin, L. [1 ]
Chen, Y. [1 ]
机构
[1] Acad Armored Forces Engn, Fac Remfg Engn, Beijing 100072, Peoples R China
来源
INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) | 2013年 / 50卷
关键词
composite patch; multi-walled carbon nano-tubes (MWCNTs); mechanical properties; thermal propertie;
D O I
10.1016/j.phpro.2013.11.062
中图分类号
O414.1 [热力学];
学科分类号
摘要
The mechanical and thermal properties of multi-walled carbon nano-tubes and carbon fiber reinforced epoxy resin matrix composite patch were tested, which was prepared by the hand lay-up method. The results indicated that the imagination observed by SEM presented good resin-impregnation for both of the two kinds of composite patches, and the mechanical and thermal properties of composite patch could be effectively increased by improvement of the interface combination after adding MWCNTs. For the mechanical properties of composite patch reinforced with MWCNTs, the interlaminar shear strength, bend strength and impact-tolerance were separately increased by 3.1%, 51.66% and 60.7%; and heat-resistance obtained by DMA were shown better thermal stability. (C) 2013 The Authors. Published by Elsevier B.V.
引用
收藏
页码:405 / 409
页数:5
相关论文
共 50 条
  • [1] Investigation on Mechanical, Thermal and Bonding Properties of MWCNTs Reinforced Aramid / Epoxy Composite
    Konada, Naresh Kumar
    Suman, K. N. S.
    Bammidi, Roop Sandeep
    Kumar, B. B. Ashok
    NANO HYBRIDS AND COMPOSITES, 2020, 30 : 27 - 40
  • [2] Preparation and thermal properties of TDI modified MWCNTs/epoxy resin composite material
    Institute of Chemistry and Materials Science, College of South-Central University for Nationalities, Wuhan 430074, China
    不详
    Gongneng Cailiao, 2009, 8 (1346-1348):
  • [3] Synthesis and Characterization of Hybrid CF/MWCNTS/Epoxy Resin Composite System
    Fouda, Hany
    Guo, Lin
    Yue, Yonghai
    Chen, Ke
    Elsharkawy, Karim
    2ND INTERNATIONAL CONFERENCE ON DESIGN, MATERIALS, AND MANUFACTURING, 2017, 220
  • [4] Preparation and mechanical properties of graphene reinforced epoxy resin matrix composites
    Zhao, D. (dlzhao@mail.buct.edu.cn), 1600, Chengdu University of Science and Technology, 24 South Section 1, Yihuan Rd., Chengdu, 610065, China (28):
  • [5] Study on Mechanical Properties of the Composite Resin Matrix Fiber Reinforced
    Faculty of Civil and Architectural Engineering, Nanchang Institute of Technology Nanchang, Jiangxi
    330099, China
    Manuf. Technol., 2 (34-35):
  • [6] Study on mechanical properties of the composite resin matrix fiber reinforced
    Faculty of Civil and Architectural Engineering, Nanchang Institute of Technology, Nanchang Jiangxi
    330099, China
    Manuf. Technol., 2 (243-249):
  • [7] Comparative analysis of the mechanical properties of a composite material reinforced with carbon fibers and the polymer matrix of epoxy resin
    Nava Gastelum, Anabel
    Siqueiros Hernandez, Miriam
    Gonzalez, Benjamin
    Vega, Yuridia
    Mendoza Munoz, Ismael
    MATERIA-RIO DE JANEIRO, 2018, 23 (02):
  • [8] Effect of the Addition of Thermoplastic Resin and Composite on Mechanical and Thermal Properties of Epoxy Resin
    Wu, Jingyu
    Li, Chenggao
    Hailatihan, Bahetihan
    Mi, Longlong
    Baheti, Yeerna
    Yan, Yuze
    POLYMERS, 2022, 14 (06)
  • [9] Mechanical and Thermal Properties of Epoxy Resin Nanocomposites Reinforced with Graphene Oxide
    Liu, Qinghong
    Zhou, Xufeng
    Fan, Xinyu
    Zhu, Chunyang
    Yao, Xiayin
    Liu, Zhaoping
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2012, 51 (03) : 251 - 256
  • [10] Mechanical and Thermal Properties of Chicken Feather Reinforced Epoxy Composite
    Srivatsav, V.
    Ravishankar, Ch.
    Ramakarishna, M.
    Jyothi, Y.
    Bhanuparakash, T. N.
    INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY RESEARCH AND EDUCATION (RE2-2018), 2018, 1992