An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materials

被引:58
作者
Ertan, Rukiye [1 ]
Yavuz, Nurettin [1 ]
机构
[1] Uludag Univ, Fac Engn & Architecture, Dept Mech Engn, TR-16059 Gorukle, Turkey
关键词
Brake materials; Sliding friction; Wear testing; FRICTION MATERIALS; PERFORMANCE; COMPACTION; OPTIMIZATION; DEFORMATION; TEMPERATURE; COMPOSITES; INTERFACE; BEHAVIOR; CONTACT;
D O I
10.1016/j.wear.2010.02.026
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this study, a brake lining composition was investigated experimentally to investigate the effects of the manufacturing parameters on the tribological properties and to obtain optimal manufacturing parameters for improved tribological behaviour. The friction tests were performed using a Chase-type friction tester to find the relationship between the manufacturing parameters and tribological properties, such as the wear resistance and friction stability, depending on the test temperature and the number of braking. The density and roughness were also analysed in relation to the manufacturing parameters. The results showed that manufacturing parameters can substantially improve the tribological behaviour and manufacturing cost of brake lining as long as optimum values are chosen. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:1524 / 1532
页数:9
相关论文
共 50 条
[31]   Effect of Calcining Temperature of Ceramic Powders Prepared from TEOS/Boehmite Sol-Gel on Tribological Behavior of Brake Lining Materials [J].
Lee, K. J. ;
Chen, Y. T. ;
Cheng, H. Z. ;
Jang, J. S. C. ;
Chang, P. C. ;
Lin, S. W. ;
Chen, Y. D. .
THERMEC 2009, PTS 1-4, 2010, 638-642 :950-+
[32]   Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering [J].
Stoia, Dan Ioan ;
Linul, Emanoil ;
Marsavina, Liviu .
MATERIALS, 2019, 12 (06)
[33]   An experimental study on the effect of concentration of green nanoadditives on the tribological properties of the biolubricants [J].
Shafi, Wani Khalid ;
Charoo, M. S. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (07) :3755-3771
[34]   An Experimental Study on the Dielectric Properties of Rubber Materials [J].
Chen, Hailong ;
Xu, Yudong ;
Liu, Mengqi ;
Li, Tao .
POLYMERS, 2021, 13 (17)
[35]   Tribological and mechanical behavior of carbon nanotube containing brake lining materials prepared through sol-gel catalyst dispersion and CVD process [J].
Lee, Kuo-Jung ;
Hsu, Mao-Hsiang ;
Cheng, Huy-Zu ;
Jang, Jason Shian-Ching ;
Lin, San-Wo ;
Lee, Cheng-Ching ;
Lin, Sang-Chaur .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 483 (1-2) :389-393
[36]   Microstructure and tribological properties of PIP-SiC modified C/C-SiC brake materials [J].
Sun, Haodong ;
Fan, Shangwu ;
Wang, Le ;
Ma, Xu ;
Deng, Juanli ;
Cheng, Laifei ;
Zhang, Litong .
CERAMICS INTERNATIONAL, 2021, 47 (11) :15568-15579
[37]   Study of the effect of surface laser texture on tribological properties of cemented carbide materials [J].
Zhang, Na ;
Yang, Fazhan ;
Jiang, Fulin ;
Liu, Guohua .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2020, 234 (6-7) :993-1006
[38]   Experimental Research on the Tribological Behavior of Plastic Materials with Friction Properties, with Applications to Manipulators in the Pharmaceutical Industry [J].
Stoica, Maria ;
Petrescu, Marius Gabriel ;
Ripeanu, Razvan George ;
Laudacescu, Eugen ;
Tanase, Maria .
COATINGS, 2025, 15 (01)
[39]   Study of tribological properties of composite materials with a silicon carbide matrix [J].
V. I. Kulik ;
A. S. Nilov ;
A. P. Garshin ;
V. V. Savich ;
A. A. Dmitrovich ;
D. I. Saroka .
Refractories and Industrial Ceramics, 2012, 53 :259-268
[40]   Study of tribological properties of composite materials with a silicon carbide matrix [J].
Kulik, V. I. ;
Nilov, A. S. ;
Garshin, A. P. ;
Savich, V. V. ;
Dmitrovich, A. A. ;
Saroka, D. I. .
REFRACTORIES AND INDUSTRIAL CERAMICS, 2012, 53 (04) :259-268