Configuration optimization of magnetostrictive transducers for longitudinal guided wave inspection in seven-wire steel strands

被引：67

作者：

Liu, Zenghua ^{[1
]}

Zhao, Jichen ^{[1
]}

Wu, Bin ^{[1
]}

Zhang, Yinong ^{[1
]}

He, Cunfu ^{[1
]}

机构：

[1] Beijing Univ Technol, Coll Mech Engn & Appl Elect Technol, Beijing 100124, Peoples R China

来源：

NDT & E INTERNATIONAL | 2010年 / 43卷 / 06期

基金：

北京市自然科学基金; 中国国家自然科学基金; 国家高技术研究发展计划(863计划);

关键词：

Magnetostrictive transducer; Longitudinal mode; Steel strand; Coil; Permanent magnet; TENSILE FORCES; STRESS WAVES; PROPAGATION; TRANSFORM;

D O I：

10.1016/j.ndteint.2010.05.003

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The configuration of magnetostrictive transducers for both transmitter and receiver was optimized for the generation and reception of ultrasonic longitudinal guided waves in seven-wire steel strands in a pitch catch arrangement. Three axisymmetric permanent magnets significantly improved the capability of magnetostrictive transducers compared to two permanent magnets, and effectively increased the amplitude of the longitudinal guided wave mode, L(0, 1) at 160 kHz. Experimental results show that the maximum amplitude of a received guided wave signal could be obtained by using a receiver with a three-layer coil in parallel and a transmitter with a three-layer coil in series. The amplitudes of the defect-reflected signal increased by as much as 50% or more as compared with those when both transducers used a single layer coil. As a result, magnetostrictive transducers with an optimized configuration, including permanent magnet distribution and multilayer coil connection, could be efficiently used for the inspection of seven-wire steel strands by using ultrasonic guided waves in a pitch catch arrangement. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：484 / 492

页数：9

共 20 条

[1] Elastic waves in a fluid-loaded, semi-infinite axisymmetric rod
Ai, Yuhui
[J]. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2007, 54 (04) : 809 - 822
[2] Guided ultrasonic waves for non-destructive monitoring of the stress levels in prestressed steel strands
Chaki, S.
Bourse, G.
[J]. ULTRASONICS, 2009, 49 (02) : 162 - 171
[3] Application of Wigner-Ville transform to evaluate tensile forces in seven-wire prestressing strands
Chen, HL
Wissawapaisal, K
[J]. JOURNAL OF ENGINEERING MECHANICS, 2002, 128 (11) : 1206 - 1214
[4] Measurement of tensile forces in a seven-wire prestressing strand using stress waves
Chen, HL
Wissawapaisal, K
[J]. JOURNAL OF ENGINEERING MECHANICS-ASCE, 2001, 127 (06): : 599 - 606
[5] The reflection of the fundamental torsional mode from cracks and notches in pipes
Demma, A
Cawley, P
Lowe, M
Roosenbrand, AG
[J]. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2003, 114 (02) : 611 - 625
[6] Stress measurement and defect detection in steel strands by guided stress waves
di Scalea, FL
Rizzo, P
Seible, F
[J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2003, 15 (03) : 219 - 227
[7] Defect imaging with guided waves in a pipe
Hayashi, T
Murase, M
[J]. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2005, 117 (04) : 2134 - 2140
[8] HU H, 2008 IEEE INT C IND, P1
[9] Effects of tensile loading on the properties of elastic-wave propagation in a strand
Kwun, H
Bartels, KA
Hanley, JJ
[J]. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1998, 103 (06) : 3370 - 3375
[10] RESPONSE OF A STRAND TO AXIAL AND TORSIONAL DISPLACEMENTS
MACHIDA, S
DURELLI, AJ
[J]. JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1973, 15 (04): : 241 - 251

← 1 2 →