An investigation of the reaction hot-pressing synthesis of MoSi2/Ti3SiC2/Al composites

被引:0
作者
Zhang, J. Y. [1 ]
Fu, Z. Y. [1 ]
Wang, W. M. [1 ]
机构
[1] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
来源
HIGH-PERFORMANCE CERAMICS IV, PTS 1-3 | 2007年 / 336-338卷
关键词
MOSi2; powder metallurgy; in-situ synthesis;
D O I
10.4028/www.scientific.net/KEM.336-338.1364
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
MoSi2 is one of the few intermetallics to have potential for further systems. However, the use of MOSi2 has been hindered due to the brittle nature of the material at low temperatures, inadequate creep resistance at high temperatures, accelerated (pest) oxidation at temperatures between 450 similar to 550 degrees C. In this investigation Mo(Al,Si-2)/Ti3SiC2 composites has been prepared by reaction hot-pressing from Mo, Si, SiC, Ti, Al powder mixture under different temperatures. XRD results show that the main products are Mo(Si,Al)(2) and Ti3SiC2. Part of TiC and SiC also appeared at low treating temperature. With the treating temperature increasing SiC disappeared. No evidence show lattice change of Mo(Si,Al)(2). It must be the results of sufficient Al added. The electrical conductivity properties were also investigated. Samples treating under different temperatures showed different changes. Samples under high treating temperature showed a near linear change ranging from 27 similar to 800 degrees C and Samples under low treating temperature showed a nonlinear change.
引用
收藏
页码:1364 / 1367
页数:4
相关论文
共 13 条
[1]   INTRINSIC 2ND-PHASE PARTICLES IN POWDER-PROCESSED MOSI2 [J].
COTTON, JD ;
KIM, YS ;
KAUFMAN, MJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 144 :287-291
[2]   Processing and mechanical properties of Ti3SiC2:: II, effect of grain size and deformation temperature [J].
El-Raghy, T ;
Barsoum, MW ;
Zavaliangos, A ;
Kalidindi, SR .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (10) :2855-2860
[3]   THE MULLITE COATINGS ON HEATERS MADE OF MOLYBDENUM DISILICIDE [J].
KISLY, PS ;
KODASH, VY .
CERAMICS INTERNATIONAL, 1989, 15 (03) :189-191
[4]   High temperature oxidation and pesting of Mo(Si,Al)2 [J].
Maruyama, T ;
Yanagihara, K .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 :828-841
[5]  
Meyer MK, 1996, J AM CERAM SOC, V79, P2763, DOI 10.1111/j.1151-2916.1996.tb09046.x
[6]  
NESHPOR VS, 1964, PHY MET METALL, V18, P31
[7]   APPRAISAL OF OTHER SILICIDES AS STRUCTURAL-MATERIALS [J].
SHAH, DM ;
BERCZIK, D ;
ANTON, DL ;
HECHT, R .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 155 (1-2) :45-57
[8]   APPLICATIONS OF IN-SITU REACTIONS TO MOSI2-BASED MATERIALS [J].
SILVA, ACE ;
KAUFMAN, MJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 195 (1-2) :75-88
[9]   The intermediate and high temperature oxidation behaviour of Mo(Si1-xAlx)(2) intermetallic alloys [J].
Stergiou, A ;
Tsakiropoulos, P ;
Brown, A .
INTERMETALLICS, 1997, 5 (01) :69-81
[10]   Effects of substitution of Al for Si on the lattice variations and thermal expansion of Mo(Si,Al)2 [J].
Tabaru, T ;
Shobu, K ;
Sakamoto, M ;
Hanada, S .
INTERMETALLICS, 2004, 12 (01) :33-41