Corrosion protection of molybdate doped polypyrrole film prepared in succinic acid solution

被引：6

作者：

Vu Quoc Trung ^{[1
]}

Trinh Hong Hanh ^{[1
]}

Tran Hong Quang ^{[1
]}

Ha Manh Hung ^{[2
]}

Duong Khanh Linh ^{[1
]}

Hoang Thi Tuyet Lan ^{[3
]}

Le Minh Duc ^{[4
]}

机构：

[1] Hanoi Natl Univ Educ, Fac Chem, 136 Xuan Thuy Rd, Hanoi, Vietnam

[2] Hanoi Univ Min & Geol, Fac Gen Educ, Hanoi, Vietnam

[3] Univ Transport & Commun, Fac Basic Sci, Hanoi, Vietnam

[4] Univ Da Nang, Univ Sci & Technol, Fac Chem, Da Nang, Vietnam

来源：

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY | 2018年 / 53卷

关键词：

Polypyrrole; succinic acid; conducting polymers; corrosion protection; electrochemical impedance spectroscopy; molybdate; ELECTROCHEMICAL-BEHAVIOR; POLY(PYRROLE) COATINGS; MILD-STEEL; IRON; ELECTROSYNTHESIS; PERFORMANCE; ELECTRODE;

D O I：

10.1080/1478422X.2017.1389370

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Polypyrrole (PPy) was prepared on the mild steel substrate by electrochemical polymerisation in the solution containing pyrrole monomer and succinic acid. The mild steel surface could be passivated before and during electropolymerisation by molybdate. The morphology and structure of the PPy film were studied with SEM. The typical cauliflower structure of PPy was observed. Raman and IR spectroscopy showed that the obtained PPy was in an oxidised state. The thermal stability of PPy was investigated by the thermal gravimetric analysis, showing that PPy was stable at higher than 480 degrees C. The electrochemical property of the PPy film was performed by open circuit potential, polarisation curves (I/E), and electrochemical impedance spectroscopy. The corrosion behaviour of mild steel (CT3) with PPy film in solution NaCl 3% was studied.

引用

页码：59 / 66

页数：8

共 31 条

[1] The healing effect of polymer films containing a non-chromate inhibitor on iron corrosion at scratched surfaces [J].

Aramaki, K .

CORROSION SCIENCE, 2000, 42 (11) :1975-1991

[2] Sonoelectrochemical Synthesis of PPy-MWCNTs-Chitosan Nanocomposite Coatings: Characterization and Corrosion Behavior [J].

Ashassi-Sorkhabi, Habib ;

Bagheri, Robabeh ;

Rezaei-moghadam, Babak .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (01) :385-392

[3] New single-step electrosynthesis process of homogeneous and strongly adherent polypyrrole films on iron electrodes in aqueous medium [J].

Bazzaoui, M ;

Martins, L ;

Bazzaoui, EA ;

Martins, JI .

ELECTROCHIMICA ACTA, 2002, 47 (18) :2953-2962

[4] FILMFORMING ELECTROPOLYMERIZATION OF PYRROLE ON IRON IN AQUEOUS OXALIC-ACID [J].

BECK, F ;

MICHAELIS, R ;

SCHLOTEN, F ;

ZINGER, B .

ELECTROCHIMICA ACTA, 1994, 39 (02) :229-234

[5] CHARACTERIZATION OF POLYPYRROLE ELECTROPOLYMERIZED ON DIFFERENT ELECTRODES [J].

CHEUNG, KM ;

BLOOR, D ;

STEVENS, GC .

POLYMER, 1988, 29 (09) :1709-1717

[6]

Conway B E, 1999, ELECTROCHEMICAL SUPE

[7]

Fall M, 2006, B CHEM SOC ETHIOPIA, V20, P279

[8] The electrochemical synthesis of polypyrrole at a copper electrode: corrosion protection properties [J].

Fenelon, AM ;

Breslin, CB .

ELECTROCHIMICA ACTA, 2002, 47 (28) :4467-4476

[9] Corrosion protection properties afforded by an in situ electropolymerized polypyrrole layer on CuZn [J].

Fenelon, AM ;

Breslin, CB .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (11) :B540-B546

[10] Electrosynthesis of strongly adherent polypyrrole coatings on iron and mild steel in aqueous media [J].

Ferreira, CA ;

Aeiyach, S ;

Aaron, JJ ;

Lacaze, PC .

ELECTROCHIMICA ACTA, 1996, 41 (11-12) :1801-1809

← 1 2 3 4 →