Short arc modes determining both contact welding and material transfer

被引：19

作者：

Rieder, Werner F. ^{[1
]}

Neuhaus, Alexander R.

机构：

[1] Vienna Univ Technol, Inst Power Syst & Energy Econ, Vienna, Austria

[2] AC2T Res GmbH, Austrian Ctr Competence Tribol, Wiener Neustadt, Austria

来源：

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES | 2007年 / 30卷 / 01期

关键词：

contact welding; electrical contacts; loss; material transfer; switching;

D O I：

10.1109/TCAPT.2007.892056

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Microscopic investigations of the molten marks left by metal vapor bounce arcs on both anode and cathode showed characteristic results dependent on the arc mode ("anode arc" or "cathode arc" according to Germer). Differences in arc spot sizes and appearance yielded a key to explain the different weld strength values caused by short time and by long time bounces, respectively, but also to understand the changes of direction of material transfer when the arc mode changes.

引用

页码：9 / 14

页数：6

共 31 条

[1] ARCING OF ELECTRICAL CONTACTS IN TELEPHONE SWITCHING CIRCUITS .5. MECHANISMS OF THE SHORT ARC AND EROSION OF CONTACTS [J].

ATALLA, MM .

BELL SYSTEM TECHNICAL JOURNAL, 1955, 34 (05) :1081-1102

[2] ARC DURATION IN ANODIC CASE [J].

AUGIS, JA ;

HINES, LL .

IEEE TRANSACTIONS ON PARTS HYBRIDS AND PACKAGING, 1975, PH11 (01) :11-14

[3] FLUCTUATION OF ARC POTENTIAL CAUSED BY METAL-VAPOR DIFFUSION IN ARCS IN AIR [J].

BODDY, PJ ;

UTSUMI, T .

JOURNAL OF APPLIED PHYSICS, 1971, 42 (09) :3369-&

[4]

BOYLE WS, 1955, J APPL PHYS, V26, P57

[5]

CHEN Z, 1998, P 19 INT C EL CONT, P355

[6]

COWBURN MC, 1970, P 5 ICECP, P281

[7]

DIETRICH I, 1959, ANN PHYS, V4, P167

[8] 2 DISTINCT TYPES OF SHORT ARCS [J].

GERMER, LH ;

BOYLE, WS .

JOURNAL OF APPLIED PHYSICS, 1956, 27 (01) :32-39

[9]

Gray E. W., 1973, IEEE Transactions on Plasma Science, VPS-1, P30, DOI 10.1109/TPS.1973.4316076

[10]

HAASE G, 1964, Z ANGEW PHYSIK, V18, P116

← 1 2 3 4 →