The removal of boron from aqueous solutions using natural and chemically modified sorbents

The presence of excessive amounts of boron (B) in water resources can endanger the health of organisms in an ecosystem. In this study, B removal from aqueous solutions was investigated using natural easily available materials including bentonite, kaolinite, zeolite, waste calcite, and residues of wheat, rice, and green shell of walnut as native and chemically modified with FeCl3. The optimum values of pH and contact time for the B sorption were determined before isotherm experiments. The maximum sorption of B by mineral sorbents was observed at pH 9, while it was obtained at pH 7 for walnut shell and rice residues and at pH 8 for wheat residues. The optimum time obtained for mineral sorbents and organic sorbents was 24 and 48h, respectively. The values of pHzpc measured for chemical sorbents were higher than those for organics. The sorption isotherms were performed using optimum parameters at three CaCl2 concentrations as background electrolytes. Increasing CaCl2 concentration caused to increase in B sorption. The chemical modification of sorbents by FeCl3 had a positive significant effect on B sorption. The fit of Freundlich and Langmuir models to the experimental data was very well. The largest B sorption capacity among the mineral and organic sorbents was, respectively, observed in the waste calcite and rice residues. However, the extent of the B sorption by organics was much higher than by minerals. Therefore, the use of organic materials to remove excess amounts of B from water resources can be considered as an available, cost-effective, and environmentally friendly strategy.