RELAP5/MOD3.2 analysis of a VVER-1000 reactor with UO2 fuel and mixed-oxide fuel

被引:4
作者
Hassan, YA [1 ]
Fu, C [1 ]
机构
[1] Texas A&M Univ, Dept Nucl Engn, College Stn, TX 77843 USA
关键词
VVER-1000; reactor; mixed-oxide fuel; RELAP5/MOD3.2; code;
D O I
10.13182/NT04-A3570
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
A RELAP5/MOD3.2 model of the VVER-1000/ MODEL V320 nuclear power plant was modified and a large-break loss-of-coolant accident (LBLOCA) in the cold leg was simulated. In this analysis, the core consisted of 162 UO2 assemblies and I mixed-oxide assembly. The results from the simulation were compared with the results from a similar study performed with the Russian computer program TECH-M. An uncertainty analysis was performed on the peak cladding temperature following a similar methodology called code scaling, applicability, and uncertainty. Monte Carlo calculations were performed using the response surface inferred from 15 runs of RELAP5 calculations. The result of this study shows that the emergency core coolant system would be sufficient to keep the cladding temperature during the LBLOCA scenario well below the required maximum limit.
引用
收藏
页码:325 / 334
页数:10
相关论文
共 16 条
[1]  
AUSTRESGESILO H, 1993, P 6 INT TOPL M NUCL
[2]  
Boyack B., 1989, QUANTIFYING REACTOR
[3]  
Carbajo J. J., 1999, Transactions of the American Nuclear Society, V80, P185
[4]  
CERULLO N, 1996, P 4 INT C NUCL ENG I
[5]  
GROUDEV P, 1997, P 8 INT TOPL M NUCL
[6]   Simulation of two loss-of-flow transients in a VVER-1000 nuclear power plant with RELAP5/MOD3.2 system code [J].
Hassan, YA ;
Moscalu, DR .
NUCLEAR TECHNOLOGY, 2000, 129 (01) :82-92
[7]  
*IAEA EBP WWER01 I, 1995, GUID ACC AN WWER NUC
[8]  
*ID NAT ENG ENV LA, 1995, NUREGCR5535 ID NAT E
[9]  
KIRMSE RE, 1992, P 5 INT TOPL M NUCL
[10]  
Myers R. H., 1995, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, DOI DOI 10.2307/1270613