The properties of epoxy resin coated silica fillers composites

被引：63
|
作者：
Teh, P. L.
Mariatti, M.
Akil, H. M.
Yeoh, C. K.
Seetharamu, K. N.
Wagiman, A. N. R.
Beh, K. S.
机构：
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Perai 14300, Pulau Pinang, Malaysia
[2] MS Ramaiah Sch Adv Studies, Bangalore 560054, Karnataka, India
[3] Intel Technol Sdn Bhd, Assembly Technol Dev, Bayan Lepas 11900, Pulau Pinang, Malaysia
来源：
MATERIALS LETTERS | 2007年 / 61卷 / 11-12期
关键词：
epoxy; polymer; ceramic filler; electronic packaging;
D O I：
10.1016/j.matlet.2006.08.036
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Epoxy resin coated silica fillers composites with high percentage of filler loading, such as 80 to 95 vol.% are able to be produced by a mechanical mixing technique. The advantages of high filler loading of theses materials are noted from the thermal and flexural modulus. Apparently, the materials exhibit low coefficient of thermal expansion (CTE) at as low as or below 10 ppm/degrees C and high flexural modulus of above 20 GPa. In general, these promising characteristics fulfill the requirement to be used as substrate materials in electronic packaging applications. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：2156 / 2158
页数：3
相关论文
共 50 条
  • [41] Investigation of the Influence of Microdispersed Fillers on the Physicomechanical Properties of Epoxy Composites
    Buketov, A. V.
    Skyrdenko, V. O.
    MATERIALS SCIENCE, 2015, 51 (01) : 44 - 51
  • [42] Synthesis of aluminum phosphate-coated silica: effect on mechanical properties and flame retardancy of epoxy resin
    Wang, Kui
    Huang, Weijiang
    Zhang, Kai
    Guan, Xingyu
    Tian, Qin
    Tu, Chunyun
    Fu, Qiuping
    Yan, Wei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 2550 - 2561
  • [43] Mechanical Properties of Silica-coated Multi-walled Carbon Nanotube/Epoxy Composites
    Kim, Kyunghee
    Kim, Yeongseon
    Nam, Jeonghoon
    Baeck, Sung-Hyeon
    Park, Dong Wha
    Shim, Sang Eun
    POLYMER-KOREA, 2016, 40 (01) : 117 - 123
  • [44] Effects of Spherical Silica on the Properties of an Epoxy Resin System
    Jin, Hong-Yun
    Yang, Yan-Qing
    Xu, Liang
    Hou, Shu-En
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 121 (02) : 648 - 653
  • [45] DSC analysis of epoxy molding compound with plasma polymer-coated silica fillers
    Roh, JH
    Lee, JH
    Kim, NI
    Kang, HM
    Yoon, TH
    Song, KH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 90 (09) : 2508 - 2516
  • [46] Effects of carbon nanotube fillers on the curing processes of epoxy resin-based composites
    Tao, Kun
    Yang, Shuying
    Grunlan, Jaime C.
    Kim, Yeon-Seok
    Dang, Bachlien
    Deng, Yuanjian
    Thomas, Renard L.
    Wilson, Bobby L.
    Wei, Xin
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 102 (06) : 5248 - 5254
  • [47] Study and characterization of epoxy resin composites in gel coat with different contents of inorganic fillers
    dos Santos, Ana Gabriela
    Apati, Giannini Pazisnick
    Lange Silveira, Marcia Luciane
    Testa Pezzin, Ana Paula
    MATERIA-RIO DE JANEIRO, 2017, 22
  • [48] Preparation and dielectric properties of PATP-coated nano-BaTiO3/epoxy resin composites
    Wei, Xuedong
    Xing, Ruiguang
    Zhang, Bangwen
    Zhang, Qiwei
    Bulin, Chaoke
    CERAMICS INTERNATIONAL, 2015, 41 : S492 - S497
  • [49] The Effects of Silica-Based Fillers on the Properties of Epoxy Molding Compounds
    Linec, Mitja
    Music, Branka
    MATERIALS, 2019, 12 (11)
  • [50] Thermal Properties and Dynamic Mechanical Properties of Ceramic Fillers Filled Epoxy Composites
    Saidina, D. S.
    Mariatti, M.
    Juiewatty, J.
    PROCEEDINGS OF THE 23RD SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY MALAYSIA (SCMSM 2014), 2015, 1669
12345