The properties of epoxy resin coated silica fillers composites

被引：63
|
作者：
Teh, P. L.
Mariatti, M.
Akil, H. M.
Yeoh, C. K.
Seetharamu, K. N.
Wagiman, A. N. R.
Beh, K. S.
机构：
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Perai 14300, Pulau Pinang, Malaysia
[2] MS Ramaiah Sch Adv Studies, Bangalore 560054, Karnataka, India
[3] Intel Technol Sdn Bhd, Assembly Technol Dev, Bayan Lepas 11900, Pulau Pinang, Malaysia
来源：
MATERIALS LETTERS | 2007年 / 61卷 / 11-12期
关键词：
epoxy; polymer; ceramic filler; electronic packaging;
D O I：
10.1016/j.matlet.2006.08.036
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Epoxy resin coated silica fillers composites with high percentage of filler loading, such as 80 to 95 vol.% are able to be produced by a mechanical mixing technique. The advantages of high filler loading of theses materials are noted from the thermal and flexural modulus. Apparently, the materials exhibit low coefficient of thermal expansion (CTE) at as low as or below 10 ppm/degrees C and high flexural modulus of above 20 GPa. In general, these promising characteristics fulfill the requirement to be used as substrate materials in electronic packaging applications. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：2156 / 2158
页数：3
相关论文
共 50 条
  • [1] Effect of Silica Fillers on Mechanical Properties of Epoxy/Kenaf Composites
    Jaafar, C. N. A.
    Zainol, I
    Aremu, O. O.
    REGIONAL CONFERENCE ON MATERIALS AND ASEAN MICROSCOPY CONFERENCE 2017 (RCM & AMC 2017), 2018, 1082
  • [2] Influence of Commercial Biochar Fillers on Brittleness/Ductility of Epoxy Resin Composites
    Bartoli, Mattia
    Giorcelli, Mauro
    Rosso, Carlo
    Rovere, Massimo
    Jagdale, Pravin
    Tagliaferro, Alberto
    APPLIED SCIENCES-BASEL, 2019, 9 (15):
  • [3] Effect of aluminum and aluminum/nickel hybrid fillers on the properties of epoxy composites
    Rozik, N. N.
    Asaad, J. N.
    Mansour, S. H.
    Gomaa, E.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2016, 230 (02) : 550 - 557
  • [4] Use of a combination of phosphorous-containing epoxy resin and silica fillers for development of flame retardant thermoset polymer composites
    Shree, Vibha
    Sen, Akhil Kumar
    Basu, Sayantani
    Ratna, Debdatta
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2023, 29 (01) : 130 - 143
  • [5] Dielectric Properties of Epoxy Resin Composites with Al2O3 Micro-fillers
    Nair, Nitin V.
    Patel, R. R.
    2017 INNOVATIONS IN POWER AND ADVANCED COMPUTING TECHNOLOGIES (I-PACT), 2017,
  • [6] Variation in compressive and flexural strength of the carbon epoxy composites with the addition of various fillers to the epoxy resin
    Chandramohan, Naveen Kumar
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 643 - 647
  • [7] Thermal and mechanical properties of particulate fillers filled epoxy composites for electronic packaging application
    Teh, P. L.
    Jaafar, M.
    Akil, H. M.
    Seetharamu, K. N.
    Wagiman, A. N. R.
    Beh, K. S.
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2008, 19 (04) : 308 - 315
  • [8] Mechanical properties of epoxy composites reinforced with a low volume fraction of nanosilica fillers
    Conradi, M.
    Zorko, M.
    Kocijan, A.
    Verpoest, I.
    MATERIALS CHEMISTRY AND PHYSICS, 2013, 137 (03) : 910 - 915
  • [9] Studies on mechanical and thermal properties of cellulosic fiber fillers reinforced epoxy composites
    Sathish, Thanikodi
    Jagadeesh, Praveenkumara
    Rangappa, Sanjay Mavinkere
    Siengchin, Suchart
    POLYMER COMPOSITES, 2022, 43 (07) : 4297 - 4305
  • [10] Epoxy composites modified with finely dispersed fillers
    Perminov, VP
    Modyanova, AG
    Ryabkov, YI
    Sevbo, OA
    Gailyunas, IA
    Kuchin, AV
    RUSSIAN JOURNAL OF APPLIED CHEMISTRY, 2002, 75 (04) : 636 - 640
12345