Effect of residual stress on modes of coupled MEMS resonator array

被引:2
作者
Peng, Bo [1 ]
Hu, Kaiming [1 ]
Fang, Xiaoyong [1 ]
Zhang, Wenming [1 ]
机构
[1] Shanghai Jiao Tong Univ, State Key Lab Mech Syst & Vibrat, Shanghai, Peoples R China
来源
2021 IEEE INTERNATIONAL CONFERENCE ON MANIPULATION, MANUFACTURING AND MEASUREMENT ON THE NANOSCALE (3M-NANO) | 2021年
基金
美国国家科学基金会;
关键词
MEMS resonator array; residual stress; local mode; mode coupling; ACCELEROMETER; LOCALIZATION;
D O I
10.1109/3M-NANO49087.2021.9599771
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The residual stress introduced in the packaging process of the MEMS device will cause the drift of the eigenfrequencies, thereby affecting the function of the device. In this paper, the influence of residual stress on the modal characteristics of MEMS resonator array is analyzed by laser Doppler method, and the local vibration of coupling beam with 432nm amplitude is measured by stroboscopic method. The finite element analysis model including residual stress is established. The results show that the effect of residual stress on the eigenfrequencies of different modes of the resonator differs by 14.47 times, and the in-plane mode eigenfrequency of one of the resonators increases by 170.5%. The in-plane vibration test shows that the in-plane mode of the resonator is coupled with the local mode of the coupling folded beam.
引用
收藏
页码:301 / 306
页数:6
相关论文
共 50 条
  • [31] Linear μ-bending method for the measurement of the residual stress of surface-micromachined MEMS
    Kim, JH
    Kim, JG
    Yeon, SC
    Chang, YK
    Hahn, JH
    Lee, HY
    Kim, YH
    SENSORS AND ACTUATORS A-PHYSICAL, 2005, 119 (01) : 100 - 112
  • [32] Modeling and experimental verification of thermally induced residual stress in RF-MEMS
    Soma, Aurelio
    Saleem, Muhammad Mubasher
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2015, 25 (05)
  • [33] Theoretical study on the influence of residual stress on adhesion-induced instability in MEMS
    WANG ShiJi1
    2 Logistic Engineering University of PLA
    Science Bulletin, 2009, (15) : 2606 - 2609
  • [34] THE EFFECTS OF BORON DOPING ON RESIDUAL STRESS OF HFCVD DIAMOND FILM FOR MEMS APPLICATIONS
    Zhao, Tianqi
    Wang, Xinchang
    Sun, Fanghong
    SURFACE REVIEW AND LETTERS, 2018, 25 (01)
  • [35] A novel method for the measurement of the residual stress of surface-micromachined structures for MEMS
    Kim, JH
    Kim, JG
    Yeon, SC
    Hahn, JH
    Lee, HY
    Kim, YH
    SMART SENSORS, ACTUATORS, AND MEMS, PTS 1 AND 2, 2003, 5116 : 370 - 382
  • [36] Residual Stress Analysis in RF MEMS Comb line Band Reject Filter
    Pradhan, Buddhadev
    Chakaborty, Amrita
    Gupta, Bhaskar
    PROCEEDINGS OF THE 2012 INTERNATIONAL CONFERENCE ON COMMUNICATIONS, DEVICES AND INTELLIGENT SYSTEMS (CODLS), 2012, : 180 - 183
  • [37] Accurate Model of Capacitance for MEMS Sensors using Corrugated Diaphragm with Residual Stress
    Ganji, B. Azizollah
    Taybi, M.
    INTERNATIONAL JOURNAL OF ENGINEERING, 2014, 27 (01): : 63 - 68
  • [38] Residual Stress of Graphene-Based MEMS ICP Piezoresistive Pressure Sensors
    Abd Rahman, Siti Hajar
    Soin, Norhayati
    Ibrahim, Fatimah
    Soin, Norhayati
    Ibrahim, Fatimah
    2016 INTERNATIONAL CONFERENCE ON BIO-ENGINEERING FOR SMART TECHNOLOGIES (BIOSMART), 2016,
  • [39] Effect of Cooling Modes on Residual Stress of Plasma Sprayed Mo/8YSZ Thermal Barrier Coatings
    Cui Y.
    Zhang X.
    Pang M.
    Zhongguo Xitu Xuebao/Journal of the Chinese Rare Earth Society, 2020, 38 (02): : 196 - 207
  • [40] Influence and optimization criterion of milling modes and process parameters on residual stress
    Li, Beizhi
    Yan, Yingzi
    Yang, Jianguo
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING, 2015, 39 : 1874 - 1879