Nickel-Cermet Electrodes for High-Temperature Electrochemical Devices Made Using Nanomaterials

被引:3
作者
Kuzin, B. L. [1 ]
Beresnev, S. M. [1 ]
Osinkin, D. A. [1 ]
Bogdanovich, N. M. [1 ]
Kotov, Yu. A. [2 ]
Bagazeev, A. V. [2 ]
机构
[1] Russian Acad Sci, Ural Div, Inst High Temp Electrochem, Ekaterinburg 620219, Russia
[2] Russian Acad Sci, Ural Div, Inst Electrophys, Ekaterinburg 620016, Russia
关键词
nickel-cermet electrode; nanomaterials; solid oxide electrolyte; solid-oxide fuel cells (SOFC); electrochemical activity; HIGH-PERFORMANCE; SDC COMPOSITE; FUEL-CELLS; ANODE; OXIDE; CATHODES; SOFCS;
D O I
10.1134/S1023193510030043
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Characteristics of nickel-cermet anodes obtained from weakly aggregated NiO nanopowders made by wire electric blasting (NiO/WEB) were studied. Electrodes made of NiO/WEB nanopowders have low sheet resistance (<0.1 Ohm) and high electrochemical activity (R(eta) - 0.06-0.09 Ohm cm(2) at 850-900 degrees C). Prolonged studies of symmetric cells of the (0.9H(2) + 0.1H(2)O) Ni-SSZ + CeO(2)/YSZ/CeO(2) + Ni-SSZ (0.9H(2) + 0.1H(2)O) type at the temperature of 850 degrees C showed that the electrodes preserve sufficiently high activity (R(eta) < 0.1 Ohm cm(2)) for 1000 h. Using a NiO-WEB powder allows not performing presynthesis of nickel-cermet and decreasing the anode baking temperature to 1200 degrees C.
引用
收藏
页码:278 / 284
页数:7
相关论文
共 50 条
[31]   Single-phase nickel-doped ceria cathode with in situ grown nickel nanocatalyst for direct high-temperature carbon dioxide electrolysis [J].
Qi, Wentao ;
Xie, Kui ;
Liu, Min ;
Wu, Guojian ;
Wang, Yan ;
Zhang, Yong ;
Wu, Yucheng .
RSC ADVANCES, 2014, 4 (76) :40494-40504
[32]   High-temperature electrolysis of synthetic seawater using solid oxide electrolyzer cells [J].
Lim, Chee Kuan ;
Liu, Qinglin ;
Zhou, Juan ;
Sun, Qiang ;
Chan, Siew Hwa .
JOURNAL OF POWER SOURCES, 2017, 342 :79-87
[33]   Flexible and high-temperature stable nanofiber composite made of PEI/KNN for energy harvesting [J].
Roy, Sukumar ;
Chowdhury, Anupam ;
Joshi, Mangala ;
Ali, Wazed .
JOURNAL OF MATERIALS SCIENCE, 2024, 59 (01) :171-187
[34]   High-temperature oxidation evaluation using crystal microbalance [J].
Nicoli, Michael ;
Grosjean, Francois ;
Mingant, Remy ;
Kittel, Jean ;
Trueba, Monica ;
Trasatti, Stefano ;
Perrot, Hubert ;
Ropital, Francois .
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2020, 55 (05) :365-371
[35]   In Situ, Fast, High-Temperature Synthesis of Nickel Nanoparticles in Reduced Graphene Oxide Matrix [J].
Li, Yiju ;
Chen, Yanan ;
Nie, Anmin ;
Lu, Aijiang ;
Jacob, Rohit Jiji ;
Gao, Tingting ;
Song, Jianwei ;
Dai, Jiaqi ;
Wan, Jiayu ;
Pastel, Glenn ;
Zachariah, Michael R. ;
Yassar, Reza Shahbazian ;
Hu, Liangbing .
ADVANCED ENERGY MATERIALS, 2017, 7 (11)
[36]   Influence of residual stress on the high-temperature tribological performance of nickel-based superalloy [J].
Zhang, Yang ;
Lu, Chaoze ;
Feng, Kaili ;
Shao, Tianmin .
TRIBOLOGY INTERNATIONAL, 2025, 202
[37]   Recent progress of conductive 3D-printed electrodes based upon polymers/carbon nanomaterials using a fused deposition modelling (FDM) method as emerging electrochemical sensing devices [J].
Omar, Muhamad Huzaifah ;
Razak, Khairunisak Abdul ;
Ab Wahab, Mohd Nadhir ;
Hamzah, Hairul Hisham .
RSC ADVANCES, 2021, 11 (27) :16557-16571
[38]   Design of a trigeneration system using a high-temperature fuel cell [J].
Malico, I. ;
Carvalhinho, A. P. ;
Tenreiro, J. .
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2009, 33 (02) :144-151
[39]   Fabrication of PBI/SPOSS hybrid high-temperature proton exchange membranes using SPAEK as compatibilizer [J].
Yang, Jiayu ;
Li, Xiaobai ;
Shi, Chengying ;
Liu, Bairun ;
Cao, Kaiyue ;
Shan, Cengliang ;
Hu, Wei ;
Liu, Baijun .
JOURNAL OF MEMBRANE SCIENCE, 2021, 620
[40]   Electroless palladium or nickel-phosphorus plating for fouling mitigation in high-temperature water systems [J].
Choi, Wonjun ;
Kim, Young-Jin ;
Lim, Dong-Seok ;
Bahn, Chi Bum .
MATERIALS RESEARCH EXPRESS, 2025, 12 (04)