Separation and determination of the group-type composition of modern base and lubricating oils with a wide range of polarity, especially emitted to the environment

Lubricating oils are composed of base oils (> 85% v/v) and enriching additives (< 15% v/v). Three types of base oils may be distinguished: 1) traditional bases (obtained by low-volatile fractions from crude oil distillation refining), 2) synthetic bases (mainly poly-alpha-olefins, sometimes esters, especially succinic acid esters), 3) bases of natural origin (especially obtained from refined plant oils). The bases of natural origin are the only ones recommended for application when lubricating oil may be emitted to the environment (e.g. when the machine with an open cutting system is used). Group-type separation and analysis of group-type composition of base and lubricating oils are of significant importance in quality control and environmental monitoring. Due to the potentially wide range of polarity of the components of base and lubricating oils, group-type separation becomes a difficult separation problem. It is also a serious analytical problem due to the considerable diversity of physicochemical properties. The authors propose a new procedure for the separation and determination of the group-type composition of base and lubricating oils using thin-layer liquid chromatography in normal phase systems (abr. NP-TLC) on silica gel plates impregnated with berberine salt/in the coupling of thin-layer chromatography with flame ionization detection (abr. TLC-FID). A new, effective procedure of TLC plates impregnation with berberine sulphate was presented. The proposed procedure ensures the visualization of all groups of base oils. Extensive experimental research showed that a 2-step development procedure with application of n-hexane up to 100% height of development +15 min and further n-hexane: isopropanol: tri-fluoroacetic acid 96.25: 3: 0.75 (v: v: v) up to 75% height of development is advantageous for the group-type separation, both in TLC-FID and TLC.