Mechanical behavior study of plasma sprayed hydroxyapatite coatings onto Ti6Al4V substrates using scratch test

被引:0
作者
Behnamghader, A. [1 ]
Najjar, D. [2 ]
Iost, A. [2 ]
Benayoun, S. [3 ]
机构
[1] Mat & Energy Res Ctr, Biomat Lab, Alvand St,PB 14155-4777, Tehran, Iran
[2] Arts Metiers ParisTech, CNRS, LMPGM, F-59046 Lille, France
[3] Ecole Cent Lyon, CNRS, UMR 5513, Lab Tribol Syst, F-69131 Ecully, France
来源
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词
Scratch test; Scanning electron microscopy; Plasma spraying; Hydroxyapatite; Titanium alloy; CALCIUM-PHOSPHATE; RESIDUAL-STRESS; ADHESION; DEPOSITION; TI-6AL-4V;
D O I
10.4028/www.scientific.net/MSF.638-642.641
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Mechanical behavior and fracture mechanisms of plasma sprayed hydroxyapatite coatings on TI-6Al-4V substrate were assessed taking into consideration two variables the coating thickness and the substrate roughness The results show that the specimens having a substrate arithmetic average roughness parameter R-a = 2.29 mu m is favorable with respect to R-a = 1 23 mu m. For coating thickness above 105 mu m, cracks can be observed in the coating/substrate interface and the higher critical load P-c2 (used generally in comparative evaluation of adherence) decreases A 90 mu m coating thickness sprayed on a substrate having an arithmetic average roughness parameter R-a equal to 2.29 pm seems to be the best compromise between microstructure, mechanical resistance (high critical loads and fairly good contact quality) and long term stability in the physiological medium (low dissolution rate) for an orthopedic application.
引用
收藏
页码:641 / +
页数:2
相关论文
共 20 条
[1]  
BENHAMGHADER A, 2006, IFMBE P
[2]  
BULL SJ, 1989, BRIT CERAM TRANS J, V88, P177
[3]   INFLUENCE OF DEPOSITION CONDITIONS ON THE ADHESION OF SPUTTER-DEPOSITED W-C-(CO) FILMS [J].
CAVALEIRO, A ;
VIEIRA, MT .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 140 :631-638
[4]  
DARBEIDA A, 1996, TRIBOLOGIE INGENIERI
[5]  
Filip P, 1997, Z METALLKD, V88, P131
[6]   The evaluation of powder processing on microstructure and mechanical properties of hydroxyapatite (HA) /yttria stabilized zirconia (YSZ) composite coatings [J].
Fu, L ;
Khor, KA ;
Lim, JP .
SURFACE & COATINGS TECHNOLOGY, 2001, 140 (03) :263-268
[7]   Fretting wear behaviors of thermal sprayed hydroxyapatite (HA) coating under unlubricated conditions [J].
Fu, YQ ;
Batchelor, AW ;
Wang, Y ;
Khor, KA .
WEAR, 1998, 217 (01) :132-139
[8]   The thermal spray processing of HA powders and coatings [J].
Khor, KA ;
Cheang, P ;
Wang, Y .
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1997, 49 (02) :51-57
[9]   Highly adhesive hydroxyapatite coatings on alumina substrates prepared by ion-beam assisted deposition [J].
Kim, TN ;
Feng, QL ;
Luo, ZS ;
Cui, FZ ;
Kim, JO .
SURFACE & COATINGS TECHNOLOGY, 1998, 99 (1-2) :20-23
[10]   Studies on calcium phosphate coatings [J].
Lee, IS ;
Kim, HE ;
Kim, SY .
SURFACE & COATINGS TECHNOLOGY, 2000, 131 (1-3) :181-186