The impact of resin-coating on sub-critical crack extension in a porcelain laminate veneer material

被引:12
作者
Cao, Xu [1 ]
Fleming, Garry J. P. [2 ]
Addison, Owen [1 ,3 ]
机构
[1] Univ Birmingham, Sch Dent, Biomat Unit, 5 Mill Pool Way, Birmingham B5 7EG, W Midlands, England
[2] Dublin Dent Univ Hosp, Mat Sci Unit, Lincoln Pl, Dublin 2, Ireland
[3] Univ Alberta, Sch Dent, Edmonton, AB T6G 1C9, Canada
基金
英国工程与自然科学研究理事会;
关键词
Veneer; Ceramic; Cement; Stress-corrosion; Strength; BRITTLE COATINGS; STRESS-CORROSION; STRENGTH; FAILURE; MODULUS; VARIABLES; FATIGUE; GROWTH; MODES; DISCS;
D O I
10.1016/j.dental.2017.02.004
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Objectives. Characterisation of the interaction between crack extension, crack stabilisation and stress/strain relaxation in the polymeric matrix, the interplay between stress corrosion cracking and the mechanical response of a resin-based luting adhesive within a surface defect population could extend PLV restoration longevity by optimising cementation protocols. The aim was to investigate the influence of stress corrosion cracking and the viscoelastic behaviour of a resin-based luting adhesive independently by controlling the environmental conditions operative during test specimen fabrication. Methods. The effects of stress corrosion at ceramic crack tips and potential viscoelastic responses to loading of the resin-coated impregnating cracks were isolated. Resin-coated feldspathic ceramic test specimens were fabricated in ambient humidity or following moisture exclusion. Bi-axial flexure strengths of groups (n = 20) were determined at constant loading rates of 2.5,10, 40,160 or 640 N/min and data was compared with uncoated controls. Fractographic analyses were performed on all fractured test specimens. Results. Resin-cement coating resulted in significant ceramic strengthening in all conditions tested (p < 0.01). A two-way ANOVA demonstrated that the exclusion of moisture during resin-coating significantly increased mean BFS (p<0.01) but post-hoc Tukey tests identified that moisture exclusion resulted in significant increases in BFS values only at intermediate loading rates with no significant differences observed at either the fastest or slowest loading rates (640 and 2.5 N/min, respectively). Significance. Mechanical reinforcement of PLV materials by resin-cement systems is yet to be optimized. The viscoelastic behavior of the resin-cement itself can influence the magnitude of reinforcement observed and sub-critical crack growth. (C) 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:498 / 504
页数:7
相关论文
共 36 条
[11]   The apparent increase of the Young's modulus in thin cement layers [J].
De Jager, N ;
Pallav, P ;
Feilzer, AJ .
DENTAL MATERIALS, 2004, 20 (05) :457-462
[12]  
Dumfahrt H, 2000, INT J PROSTHODONT, V13, P9
[13]  
Faunce FR, 1977, J TEXAS DENT ASS, V53, P30
[14]   The influence of resin flexural modulus on the magnitude of ceramic strengthening [J].
Fleming, Garry J. P. ;
Hooi, Paul ;
Addison, Owen .
DENTAL MATERIALS, 2012, 28 (07) :769-776
[15]   An assessment of the influence of mixing induced variability on the bi-axial flexure strength of dentine porcelain discs and the implications for laboratory testing of porcelain specimens [J].
Fleming, GJP ;
Shaini, FJ ;
Marquis, PM .
DENTAL MATERIALS, 2000, 16 (02) :114-119
[16]   THE FATIGUE MODULUS OF GLASS [J].
GLATHART, JL ;
PRESTON, FW .
JOURNAL OF APPLIED PHYSICS, 1946, 17 (03) :189-195
[17]   Determination of the slow crack growth susceptibility coefficient of dental ceramics using different methods [J].
Gonzaga, Carla Castiglia ;
Cesar, Paulo Francisco ;
Miranda, Walter Gomes, Jr. ;
Yoshimura, Humberto Naoyuki .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2011, 99B (02) :247-257
[18]   Slow crack growth and reliability of dental ceramics [J].
Gonzaga, Carla Castiglia ;
Cesar, Paulo Francisco ;
Miranda, Walter Gomes, Jr. ;
Yoshimura, Humberto Naoyuki .
DENTAL MATERIALS, 2011, 27 (04) :394-406
[19]  
Griffith A.A., 1921, Phil Trans Roy Soc Lond, V221, P163, DOI DOI 10.1098/RSTA.1921.0006
[20]   Testing rate and cementation seating load effects on resin-strengthening of a dental porcelain analogue [J].
Hooi, Paul ;
Addison, Owen ;
Fleming, Garry J. P. .
JOURNAL OF DENTISTRY, 2013, 41 (06) :514-520