Simultaneous measurement of thickness and lift-off using the tangential component of magnetic flux density in pulsed eddy current testing

The pulsed eddy current (PEC) technique is commonly used in the petrochemical and power generation industries to measure two parameters: the degree of pipe wall corrosion and the thickness of the insulation shield. These two parameters can be evaluated by examining the thickness of conductive materials and the lift-off distance, respectively. To explore a possible technique for simultaneously measuring the thickness and the lift- off, the present study envisaged the development of a PEC testing method based on detecting the tangential component of the magnetic flux density. The tangential component of the magnetic flux density was excited by two racetrack-type coils injecting currents in opposite directions that were picked up by a magnetic sensor. The slope in logarithmic scale and the time-to-peak of the magnetic signal were verified to characterise the features of the thickness and the lift-off, respectively. By analysing the simulation and experimental results, the feasibility of simultaneously measuring the thickness and the lift- off was demonstrated.