Circulating fluidized beds - diameter, solids hold-up, axial gas-mixing, and contact efficiency

被引：10

作者：

Contractor, R ^{[1
]}

Dry, RJ ^{[1
]}

White, C ^{[1
]}

Mao, QM ^{[1
]}

Konstantinidis, S ^{[1
]}

Potter, OE ^{[1
]}

机构：

[1] Monash Univ, Dept Chem Engn, Clayton, Vic 3168, Australia

来源：

POWDER TECHNOLOGY | 2000年 / 111卷 / 1-2期

关键词：

solid hold-up; axial gas-mixing; contact efficiency;

D O I：

10.1016/S0032-5910(00)00249-7

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Circulating fluidized beds (CFB) employed comprised: 0.0158 m riser diameter with 7.2 m height, 0.09 m riser diameter with 7.2 m height or 3.6 m height, and 0.254 m riser diameter with 10.5 m height. Measurements reported hen comprise solid hold-up and axial gas-mixing. Solid circulation rates up to 350 kg/m(2) s and gas velocities of 2, 4, 6, 8 ms were employed. Axial dispersion measurements using a non-adsorbed tracer confirm relatively low dispersion in the 0.0158 m dia riser. and for the 0.254 m dia riser a continual monotonic increase in axial dispersion with increase in air velocity up to 8 m/s. "Contact efficiency" (Dry) measurements were made for the 0.0158 and 0.254 m dia risers. in the 0.254 m dia riser, all "contact efficiencies" were measured at 100%. (C) 2000 Elsevier Science S.A. All rights reserved.

引用

页码：132 / 144

页数：13

共 50 条

[1] HOLD-UP AND AXIAL MIXING CHARACTERISTICS OF 2 AND 3 PHASE FLUIDIZED-BEDS
KIM, SD
BAKER, CGJ
BERGOUGNOU, MA
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1972, 50 (06): : 695 - 701
[2] CFD studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds
Hosseini, Seyyed Hossein
Ahmadi, Goodarz
Rahimi, Rahbar
Zivdar, Mortaza
Esfahany, Mohsen Nasr
POWDER TECHNOLOGY, 2010, 200 (03) : 202 - 215
[3] GAS BUBBLE HOLD-UP AND AXIAL-DISPERSION COEFFICIENT OF EMULSION PHASES IN FLUIDIZED-BEDS
KAWASE, Y
MOOYOUNG, M
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1987, 65 (03): : 505 - 507
[4] CFD and experimental studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds
Ahuja, G. N.
Patwardhan, A. W.
CHEMICAL ENGINEERING JOURNAL, 2008, 143 (1-3) : 147 - 160
[5] CFD and experimental studies of solids hold-up distribution and circulation patterns in gas-solid fluidized beds
Chemical Engineering Department, Institute of Chemical Technology, Matunga, Mumbai, 400019, India
Chemical Engineering Journal, 2008, 143 (1-3): : 147 - 160
[6] GAS MIXING IN BEDS OF FLUIDIZED SOLIDS
GILLILAND, ER
MASON, EA
INDUSTRIAL AND ENGINEERING CHEMISTRY, 1952, 44 (01): : 218 - 224
[7] GAS HOLD-UP AND AXIAL MIXING IN FLUID PHASE OF BUBBLE COLUMNS
REITH, T
RENKEN, S
ISRAEL, BA
CHEMICAL ENGINEERING SCIENCE, 1968, 23 (06) : 619 - &
[8] Radial distribution and axial development of solids hold-up in the riser coupled with fluidized bed
Wang, De-Wu
Lu, Chun-Xi
Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2008, 8 (02): : 217 - 223
[9] ENTRAINMENT OF SOLIDS FROM FLUIDIZED-BEDS .1. HOLD-UP OF SOLIDS IN THE FREEBOARD .2. OPERATION OF FAST FLUIDIZED-BEDS
KUNII, D
LEVENSPIEL, O
POWDER TECHNOLOGY, 1990, 61 (02) : 193 - 206
[10] Axial solids mixing in a circulating fluidized bed
Teplitsky, YS
Borodulya, VA
Nogotov, EF
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (22) : 4335 - 4343

← 1 2 3 4 5 →