Comparative analysis of thermal runaway characteristics of lithium-ion battery under oven test and local high temperature

被引:7
作者
Zhu, Lei [1 ]
Xu, Xiaoming [1 ]
Zhao, Lei [1 ]
Yuan, Qiuqi [1 ]
机构
[1] Jiangsu Univ, Sch Automot & Traff Engn, Zhenjiang 212013, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
comparative analysis; lithium‐ ion battery; local heat temperature; oven test; thermal runaway; LINI1/3MN1/3CO1/3O2 CATHODE MATERIAL; PHASE-CHANGE MATERIALS; MANAGEMENT-SYSTEM; BEHAVIOR; SAFETY; CELLS; MODEL; FIRE;
D O I
10.1002/fam.2976
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Lithium-ion batteries are increasingly used in the field of new energy vehicles. Thermal runaway is the biggest potential safety hazard. In order to achieve safer battery and battery design, it is necessary to fully understand thermal runaway. In this paper, the thermal abuse model of lithium-ion battery is established, and the accuracy of the model simulation is verified through experiments. The thermal runaway characteristics of the battery under the oven test and local heating conditions are compared and analyzed. The results show that under the condition of 200 degrees C oven test in more than 10 000 seconds to thermal runaway, the local heating under the condition of the thermal runaway in more than 500 seconds, and the oven temperature distribution more uniform on the surface of the test under the condition of the battery, the temperature distribution is almost consistent when thermal runaway. According to the characteristics of local heating mode, the small heating area cannot occur thermal runaway, and found that in the process of thermal runaway battery anode and electrolyte reaction to generate heat is the main cause of thermal runaway battery. This result can be used to guide the effective prevention of thermal runaway of lithium-ion batteries and prevent spreading.
引用
收藏
页码:397 / 409
页数:13
相关论文
共 39 条
  • [21] Thermal behavior analyses of stacked prismatic LiCoO2 lithium-ion batteries during oven tests
    Peng, Peng
    Jiang, Fangming
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 88 : 411 - 423
  • [22] [彭鹏 Peng Peng], 2014, [化工学报, CIESC Journal], V65, P647
  • [23] Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method
    Ping, Ping
    Wang, Qingsong
    Huang, Peifeng
    Sun, Jinhua
    Chen, Chunhua
    [J]. APPLIED ENERGY, 2014, 129 : 261 - 273
  • [24] Recent developments and likely advances in lithium-ion batteries
    Ritchie, Andrew
    Howard, Wilmont
    [J]. JOURNAL OF POWER SOURCES, 2006, 162 (02) : 809 - 812
  • [25] Lithium batteries: Status, prospects and future
    Scrosati, Bruno
    Garche, Juergen
    [J]. JOURNAL OF POWER SOURCES, 2010, 195 (09) : 2419 - 2430
  • [26] Smith B., 2012, DOTHS811573 NAT HIGH
  • [27] Simulation of capacity fade in lithium-ion batteries
    Spotnitz, R
    [J]. JOURNAL OF POWER SOURCES, 2003, 113 (01) : 72 - 80
  • [28] A consideration of lithium cell safety
    Tobishima, S
    Yamaki, J
    [J]. JOURNAL OF POWER SOURCES, 1999, 81 : 882 - 886
  • [29] Oxygen Evolution in Overcharged LixNi1/3Co1/3Mn1/3O2 Electrode and Its Thermal Analysis Kinetics
    Wang Haiyan
    Tang Aidong
    Huang Kelong
    [J]. CHINESE JOURNAL OF CHEMISTRY, 2011, 29 (08) : 1583 - 1588
  • [30] Progressive mechanical indentation of large-format Li-ion cells
    Wang, Hsin
    Kumar, Abhishek
    Simunovic, Srdjan
    Allu, Srikanth
    Kalnaus, Sergiy
    Turner, John A.
    Helmers, Jacob C.
    Rules, Evan T.
    Winchester, Clinton S.
    Gorney, Philip
    [J]. JOURNAL OF POWER SOURCES, 2017, 341 : 156 - 164