Particle Swarm Optimization-based dummy sub-carriers insertion for peak to average power ratio reduction in OFDM systems

Orthogonal Frequency Division Multiplexing (OFDM) is the best choice for wireless and wired high data rate communications. The OFDM system has many advantages such as high spectral efficiency, robustness to channel fading, and immunity to impulse interference. However, it has a main drawback, which is the Peak to Average Power Ratio (PAPR). Selecting Mapping (SLM) and Partial Transmit Sequences (PTS) are the two essential techniques for reducing the PAPR; however, they need to send side information to indicate how the transmitter generates signals. In this paper, Particle Swarm Optimization (PSO)-based dummy sub-carriers are inserted with the data to reduce PAPR without transmitting side information. The incorporation of PSO-based Dummy Sub-carriers Insertion (DSI) method on this system is performed by measuring the PAPR at the IFFT output (Inverse Fast Fourier Transform) after adding 6 adaptive sub-carrier sequences to the input data of IFFT. The PSO-based dummy algorithm decides to send the data once the PAPR of this data sequence and dummy sub-carrier is under a specific threshold. Using MATLAB as a mathematical simulation tool, simulation results are presented for a standard OFDM network model. The network model has been simulated in an Additive White Gaussian Noise (AWGN) channel environment to investigate PAPR and Bit-Error Rate (BER) performance. The simulation results show that the dummy sequence based on PSO reduces PAPR down to 4 dB compared to a conventional OFDM system and down to 3 dB compared with the clipping technique for the same BER performance. (C) 2021 The Korean Institute of Communications and Information Sciences (KICS). Publishing services by Elsevier B.V.