Enhanced power factor of Bi0.5Sb1.5Te3 thin films via PbTe incorporating and annealing

被引:10
作者
Liang, Shaojun [1 ,2 ,3 ]
Zhu, Hanming [1 ,2 ,3 ]
Ge, Xue [1 ,2 ,3 ]
Yue, Song [1 ,2 ,3 ]
机构
[1] Guangzhou Key Lab Vacuum Coating Technol & New En, Siyuan Lab, Guangzhou, Guangdong, Peoples R China
[2] Guangdong Prov Engn Technol Res Ctr Vacuum Coatin, Guangzhou, Guangdong, Peoples R China
[3] Jinan Univ, Dept Phys, Guangzhou 510632, Guangdong, Peoples R China
关键词
Bismuth telluride; Annealing; Power factor; Thermoelectric performance; BISMUTH-ANTIMONY TELLURIDE; THERMOELECTRIC PROPERTIES; PERFORMANCE;
D O I
10.1016/j.surfin.2021.101099
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Improving the thermoelectric properties of bismuth telluride based thin films is of great significance for promoting their commercial applications. In this work, Bi0.5Sb1.5Te3/PbTe composite films with high orientation were prepared by magnetron co-sputtering. The carrier concentration and the electrical conductivity can be increased by adjusting the amount of PbTe. The subsequent annealing was observed to improve the thin films crystalline and leads to the appearance of the PbTe phase, which optimizes the carrier concentration and mobility, and then improves the electrical conductivity and Seebeck coefficient synergistically. As a result, the highest power factor about 2.06 mW/mK(2) was obtained at 480 K in the Bi0.5Sb1.5Te3/PbTe composite film containing 0.6 % Pb after the annealing at 300 degrees C for 1h, which is nearly 5 times as much as that of the parent Bi0.5Sb1.5Te3 film.
引用
收藏
页数:6
相关论文
共 50 条
[31]   Phonon scattering by dislocations at grain boundaries in polycrystalline Bi0.5Sb1.5Te3 [J].
Kim, Hyun-Sik ;
Kim, Sang Il ;
Lee, Kyu Hyoung ;
Kim, Sung Wng ;
Snyder, G. Jeffrey .
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2017, 254 (05)
[32]   Anisotropic thermal conductivity of sputtered Bi0.5Sb1.5Te3 films after current-assisted thermal treatment [J].
Hsiao, Jen-Chuan ;
Chen, Yao-Hsiang ;
Liao, Chien-Neng .
THIN SOLID FILMS, 2018, 645 :93-96
[33]   Preparation and Thermoelectric Properties of Graphite/Bi0.5Sb1.5Te3 Composites [J].
Hu, Wenhua ;
Zhou, Hongyu ;
Mu, Xin ;
He, Danqi ;
Ji, Pengxia ;
Hou, Weikang ;
Wei, Ping ;
Zhu, Wanting ;
Nie, Xiaolei ;
Zhao, Wenyu .
JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (06) :3344-3349
[34]   Preparation and Thermoelectric Properties of Graphite/Bi0.5Sb1.5Te3 Composites [J].
Wenhua Hu ;
Hongyu Zhou ;
Xin Mu ;
Danqi He ;
Pengxia Ji ;
Weikang Hou ;
Ping Wei ;
Wanting Zhu ;
Xiaolei Nie ;
Wenyu Zhao .
Journal of Electronic Materials, 2018, 47 :3344-3349
[35]   Effects of hot pressing on electric performances of Bi0.5Sb1.5Te3 [J].
Xiao Bo ;
Chen Hui ;
Wu Borong ;
Zhu Lei ;
Liu Mingyi ;
Jian Xuyu ;
Li Lin .
RARE METALS, 2006, 25 :320-323
[36]   Enhancing thermoelectric performance of Cu-modified Bi0.5Sb1.5Te3 by electroless plating and annealing [J].
Huang, Zhongyue ;
Zhang, He ;
Zheng, Kun ;
Dai, Xueting ;
Yu, Yuan ;
Cheng, Hefa ;
Zu, Fangqiu ;
Chen, Zhi-Gang .
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2018, 28 (02) :218-224
[37]   Enhanced thermoelectric and mechanical properties of Bi0.5Sb1.5Te3 alloy with dispersed yttrium oxide ceramic nanoparticles [J].
Li, Cun-Cheng ;
Zhang, Ming-Wei ;
Xin, Ji-Wu ;
Wei, Lei ;
Zhao, Wen-Yu .
RARE METALS, 2024, 43 (04) :1758-1768
[38]   Effect of solder and barrier layer elements on the thermoelectric properties of Bi0.5Sb1.5Te3 [J].
Mi, Hong-Xing ;
Wu, Ming-Xing ;
Cao, Shen ;
Huang, Zhong-Yue ;
Han, Li ;
Xu, Ju .
MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
[39]   Enhanced thermoelectric properties of p-type Bi0.5Sb1.5Te3 bulk alloys by electroless plating with Cu and annealing [J].
Huang, Zhongyue ;
Dai, Xueting ;
Yu, Yuan ;
Zhou, Chongjian ;
Zu, Fangqiu .
SCRIPTA MATERIALIA, 2016, 118 :19-23
[40]   Electrically motivated atomic migration and defect formation in Bi0.5Sb1.5Te3 compounds [J].
Li, Cheng-Tang ;
Chen, Yao-Hsiang ;
Liao, Chien-Neng .
MATERIALS CHEMISTRY AND PHYSICS, 2018, 204 :373-377