A modified global optimization method based on surrogate model and its application in packing profile optimization of injection molding process

This article introduces a step-by-step optimization method based on the radial basis function (RBF) surrogate model and proposes an improved expected improvement selection criterion to better the global performance of this optimization method. Then it is applied to the optimization of packing profile of injection molding process for obtaining best shrinkage evenness of molded part. The idea is first, to establish an approximation function relationship between shrinkage evenness and process parameters by a small size of design of experiment with RBF surrogate model to alleviate the expensive computational expense in the optimization iterations. And then, an improved criterion is used to provide direction in which additional training samples could be added to better the surrogate model. Two test functions are investigated and the results show that stronger global exploration performance and more precise optimal solution could be obtained with the improved method at the expense of increasing the infill data properly. Furthermore the optimal solution of packing profile is obtained for the first time which indicates that the type of optimal packing profile should be first constant and then ramp-down. Subsequently, the discussion of this result is given to explain why the optimal profile is like that.