Effect of high energy milling on the magnetic properties of the WC-10wt.%Co cemented carbides.

被引：2

作者：

Manuel, J. B. ^{[1
]}

de Araujo, J. H. ^{[1
]}

da Costa, F. A. ^{[1
]}

U. U. Gomes, H. R. de Macedo ^{[1
]}

da Silva, A. G. P. ^{[1
]}

机构：

[1] Univ Fed Rio Grande do Norte, Programa Posgrad Ciencia & Engn Mat, Campus Univ, BR-59072970 Natal, RN, Brazil

来源：

ADVANCED POWDER TECHNOLOGY V | 2006年 / 530-531卷

关键词：

magnetization; high energy milling; composite powder and sintering;

D O I：

10.4028/www.scientific.net/MSF.530-531.322

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Cemented tungsten carbides were produced by liquid-phase sintering. In these work high energy milling (HEM) was used to produce homogeneous and finely grained powder mixtures. The milling effect on the magnetic properties of sintered samples is studied. Different mixtures in same composition (WC-10wt.%Co) were prepared by conventional mixture technique and wet HEM up to 300 hs in Planetary Mill. Magnetic hysteresis measurements on the sintered samples detected a significant increase in the coercitive field and a decrease on the saturation magnetization with milling time increasing. X-ray diffractogram, show phase transformations with milling time. The Magnetic properties are correlated with phase relations and microstructural properties of the sintered samples.

引用

页码：322 / +

页数：2