Optimisation of the properties of siloxane coatings as anti-biofouling coatings: Comparison of PACVD and hybrid PACVD-PVD coatings

被引：13

作者：

Navabpour, Parnia ^{[1
]}

Teer, Dennis ^{[1
]}

Su, Xueju ^{[2
]}

Liu, Chen ^{[2
]}

Wang, Su ^{[2
]}

Zhao, Qi ^{[2
]}

Donik, Crtomir ^{[3
]}

Kocijan, Aleksandra ^{[3
]}

Jenko, Monika ^{[3
]}

机构：

[1] Teer Coatings Ltd, Droitwich WR9 9AS, Worcs, England

[2] Univ Dundee, Dept Mech Engn, Dundee DD1 4HN, Scotland

[3] Inst Met & Technol, SI-1001 Ljubljana, Slovenia

来源：

SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 20期

关键词：

PACVD; HMDSO; Biofouling; Pseudomonas fluorescens; THIN-FILMS; DEPOSITION;

D O I：

10.1016/j.surfcoat.2010.03.011

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Plasma-assisted chemical vapour deposition (PACVD) siloxane coatings from a mixture of hexamethyldisiloxane (HMDSO) and O-2, and hybrid coatings deposited by simultaneous sputtering of silicon and plasma polymerisation of HMDSO + O-2 were prepared on glass and steel substrates. The effect of the addition of sputtered silicon was investigated for coatings with different HMDSO/O-2 ratios. The microstructure and composition of coatings were affected by the coating parameters used. Silicon content was roughly the same for all coatings; carbon content decreased while oxygen content and surface energy increased with decreasing HMDSO/O-2 ratio in hybrid coatings. Hardness and modulus were higher for hybrid coatings and increased with decreasing HMDSO/O-2 ratio. Hybrid coatings showed much better scratch and wear resistance than PACVD coatings. All coatings showed good fouling-release performance with the freshwater bacterium Pseudomonas fluorescens. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：3188 / 3195

页数：8

共 11 条

[1] Deposition parameters to improve the fouling-release properties of thin siloxane coatings prepared by PACVD [J].

Akesso, Laurent ;

Navabpour, Parnia ;

Teer, Dennis ;

Pettitt, Michala E. ;

Callow, Maureen E. ;

Liu, Chen ;

Su, Xueju ;

Wang, Su ;

Zhao, Qi ;

Donik, Crtomir ;

Kocijan, Aleksandra ;

Jenko, Monika ;

Callow, James A. .

APPLIED SURFACE SCIENCE, 2009, 255 (13-14) :6508-6514

[2] The potential of nano-structured silicon oxide type coatings deposited by PACVD for control of aquatic biofouling [J].

Akesso, Laurent ;

Pettitt, Michala E. ;

Callow, James A. ;

Callow, Maureen E. ;

Stallard, Joanne ;

Teer, Dennis ;

Liu, Chen ;

Wang, Su ;

Zhao, Qi ;

D'Souza, Fraddry ;

Willemsen, Peter R. ;

Donnelly, Glen T. ;

Donik, Crtomir ;

Kocijan, Aleksandra ;

Jenko, Monika ;

Jones, Lathe A. ;

Guinaldo, Patricia Calvillo .

BIOFOULING, 2009, 25 (01) :55-67

[3]

BULL SJ, 2001, HDB HARD COATIGNS DE, P182

[4] Description of a hybrid PECVD-PVD-process: Application to Zn-Si-O and Ti-Si-O composites thin films [J].

Daniel, A. ;

Duguet, T. ;

Belmonte, T. .

APPLIED SURFACE SCIENCE, 2007, 253 (24) :9323-9329

[5] Deposition of "polysiloxane" thin films containing silver particles by an RF asymmetrical discharge [J].

Despax, Bernard ;

Raynaud, Patrice .

PLASMA PROCESSES AND POLYMERS, 2007, 4 (02) :127-134

[6]

FAIRLY N, 2010, CASAXPS VAMAS PROCES

[7] Characterization of SiO2 thin films prepared by plasma-activated chemical vapour deposition [J].

Pfuch, A. ;

Heft, A. ;

Weidl, R. ;

Lang, K. .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2) :189-196

[8]

van Oss C.J., 1994, Interfacial Forces in Aqueous Media

[9] Hexamethyldisiloxane (HMDSO)-plasma-polymerised coatings as primer for iron corrosion protection: influence of RF bias [J].

Vautrin-Ul, C ;

Roux, F ;

Boisse-Laporte, C ;

Pastol, JL ;

Chausse, A .

JOURNAL OF MATERIALS CHEMISTRY, 2002, 12 (08) :2318-2324

[10] Characterisation of SiOxCyHz thin films deposited by low-temperature PECVD [J].

Zanini, Stefano ;

Riccardi, Claudia ;

Orlandi, Marco ;

Grimoldi, Elisa .

VACUUM, 2007, 82 (02) :290-293

← 1 2 →