High-rate deposition of thick (Cr,Al)ON coatings by high speed physical vapor deposition

Inspired by diffusion barriers, (Cr,Al)ON coatings are developed as oxidation protection for gamma titanium aluminide alloys (gamma-TiAl), offering oxidation resistance for applications at elevated temperatures, such as turbines. In this study, (Cr,Al)N and (Cr,Al)ON coatings were-deposited by means of high speed physical vapor deposition (HS-PVD) technology, basing on hollow cathode discharge (HCD) and gas flow sputtering. Using argon as plasma gas and transport medium, the HS-PVD combines the advantages of thermal spraying and physical vapor deposition, which provides very high deposition rates. The objectives of this study were to synthesize thick PVD (CLAI)ON coatings and to understand how various process parameters influence coating morphology, deposition rate and phase composition. Keeping other parameters constant, the argon gas flow was varied between Q(Ar) = 6000 sccm and Q(Ar) = 12,000 sccm, different N-2:O-2 gas flow mixtures from 1:2 to 4:1 were introduced into the coating chamber and the bias voltage was adjusted between U-B = -25 V and U-B = 150 V. A special target configuration was applied for synthesizing coatings with different Cr:Al ratios within one coating cycle. The atomic Cr:Al ratio was varied between 25/75 and 75/25. The results showed that thick s > 35 mu m (Cr,Al)ON coatings can be synthesized very efficiently at a deposition rate ds/dt approximate to 20 mu m/h. Strong influences of argon gas flow and bias voltage on the deposition rate were revealed. Furthermore, stable plasma processes were observed, even at high oxygen flows Q(O2) = 600 sccm, which would lead to target poisoning in conventional PVD processes. In this way, the HS-PVD technology reveals a high potential for the deposition of high temperature oxidation protective coatings and extends the application range of conventional PVD technology significantly. (C) 2017 Elsevier B.V. All rights reserved.