The research activities on test platform of high payload transporter joint for a tokamak

被引：2

作者：

Wang, Yan ^{[1
,2
]}

Wang, Li ^{[2
]}

Choi, Chang-Hwan ^{[3
]}

Bai, Xiaowei ^{[1
]}

Yao, Damao ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Plasma Phys, Hefei Inst Phys Sci, Hefei 230031, Peoples R China

[2] Anhui Univ Sci & Technol, Sch Mech Engn, Huainan 232001, Peoples R China

[3] ITER Org, CS, 1306 St Paul Lez Durance, F-90046 Verdon, France

来源：

FUSION ENGINEERING AND DESIGN | 2022年 / 180卷

关键词：

Remote handling; Test platform; Scheme design; Strength analysis; Load test; DESIGN;

D O I：

10.1016/j.fusengdes.2022.113183

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

This paper completed the overall scheme design and analyzed the mechanism design of the test platform of high payload transporter joint for a Tokamak. The test platform mainly includes a control system, mechanical jigs, hydraulic loading system, measuring instruments and so on. The control system was designed to control the motion execution of the test platform and the high payload transporter joint. The hydraulic loading system of the test platform was designed to apply simulated loads to the high payload transporter joint. Mechanical jigs were designed and optimized to obtain reasonable structure and lighter weight of the test platform. Some of the sensors were identified and purchased. The test protocol operation of the test platform was developed to complete the test in this paper. These research work lays a foundation for the achievement of the test platform and the testing of of high payload transporter joint for a Tokamak.

引用

页数：6

共 14 条

[1]

Alloy Structure Steels, 1999, GBT30771999 CHN

[2] Remote Handling in the Accelerator Systems of DONES [J].

Arranz, Fernando ;

Micciche, Gioacchino ;

Coloma, Sofia ;

Sanchez-Herranz, Daniel ;

Nomen, Oriol ;

Ferre, Manuel ;

Ibarra, Angel .

IEEE TRANSACTIONS ON PLASMA SCIENCE, 2020, 48 (06) :1743-1747

[3]

Choi C.-H., 2016, TECHNICAL SPECIFICAT

[4] Concept design of the upper port remote handling equipment for ITER neutral beam cell maintenance [J].

Choi, Chang-Hwan ;

Griffiths, Sarah ;

Shi, Shanshuang .

FUSION ENGINEERING AND DESIGN, 2021, 170

[5] Multi-purpose deployer for ITER in-vessel maintenance [J].

Choi, Chang-Hwan ;

Tesini, Alessandro ;

Subramanian, Rajendran ;

Rolfe, Alan ;

Mills, Simon ;

Scott, Robin ;

Froud, Tim ;

Haist, Bernhard ;

McCarron, Eddie .

FUSION ENGINEERING AND DESIGN, 2015, 98-99 :1448-1452

[6] Pre-conceptual design assessment of DEMO remote maintenance [J].

Loving, A. ;

Crofts, O. ;

Sykes, N. ;

Iglesias, D. ;

Coleman, M. ;

Thomas, J. ;

Harman, J. ;

Fischer, U. ;

Sanz, J. ;

Siuko, M. ;

Mittwollen, M. .

FUSION ENGINEERING AND DESIGN, 2014, 89 (9-10) :2246-2250

[7] Structural analysis of ITER multi-purpose deployer [J].

Manuelraj, Manoah Stephen ;

Dutta, Pramit ;

Gotewal, Krishan Kumar ;

Rastogi, Naveen ;

Tesini, Alessandro ;

Choi, Chang-Hwan .

FUSION ENGINEERING AND DESIGN, 2016, 109 :1296-1301

[8] Development of bolting tool for remote handling of ITER first wall central bolt [J].

Noguchi, Yuto ;

Nakata, Kentaro ;

Takeda, Nobukazu .

FUSION ENGINEERING AND DESIGN, 2021, 164

[9] The remote handling systems for ITER [J].

Ribeiro, Isabel ;

Damiani, Carlo ;

Tesini, Alessandro ;

Kakudate, Satoshi ;

Siuko, Mikko ;

Neri, Carlo .

FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) :471-477

[10] Concept design on RH maintenance of CFETR Tokamak reactor [J].

Song, Yuntao ;

Wu, Songtao ;

Wan, Yuanxi ;

Li, Jiangang ;

Ye, Minyou ;

Zheng, Jinxing ;

Cheng, Yong ;

Zhao, Wenlong ;

Wei, Jianghua .

FUSION ENGINEERING AND DESIGN, 2014, 89 (9-10) :2331-2335

← 1 2 →