Heavy-rainfall-induced catastrophic rockslide-debris flow at Sanxicun, Dujiangyan, after the Wenchuan Ms 8.0 earthquake

被引:122
作者
Yin, Yueping [1 ]
Cheng, Yuliang [2 ]
Liang, Jingtao [2 ]
Wang, Wenpei [1 ]
机构
[1] China Inst Geoenvironm Monitoring, Beijing, Peoples R China
[2] Sichuan Geol Survey, Chengdu, Peoples R China
关键词
Wenchuan Ms 8.0 earthquake; Heavy rainfall; Rockslide; Debris flow; JIWEISHAN; MECHANISM;
D O I
10.1007/s10346-015-0554-9
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
This paper uses the catastrophic rockslide at Sanxicun village in Dujianyan city as an example to investigate the formation mechanism of a rapid and long run-out rockslide-debris flow of fractured/cracked slope, under the application of a rare heavy rainfall in July 2013. The slope site could be affected by the Wenchuan Ms 8.0 Earthquake in 2008. The sliding involved the thick fractured and layered rockmass with a gentle dip plane at Sanxicun. It had the following formation process: (1) toppling due to shear failure at a high-level position, (2) shoveling the accumulative layer below, (3) forming of debris flow of the highly weathered bottom rockmass, and (4) flooding downward along valley. The debris flow destroyed 11 houses and killed 166 people. The run-out distance was about 1200 m, and the accumulative volume was 1.9 x 10(6) m(3). The rockslide can be divided into sliding source, shear-shoveling, and flow accumulative regions. The stability of this fractured rock slope and the sliding processes are discussed at four stages of cracking, creeping, separating, and residual accumulating, under the applications of hydrostatic pressure and uplift pressure. This research also investigates the safety factors under different situations. The double rheological model (F-V model) of the DAN-W software is utilized to simulate the kinematic and dynamic processes of the shear-shoveling region and debris flow. After the shear failure occurred at a high-level position of rock, the rockslide moved for approximately 47 s downward along the valley with a maximum velocity of 35 m/s. This is a typical rapid and long run-out rockslide. Finally, this paper concludes that the identification of the potential geological hazards at the Wenchuan mountain area is crucial to prevent catastrophic rockslide triggered by heavy rainfall. The identified geological hazards should be properly considered in the town planning of the reconstruction works.
引用
收藏
页码:9 / 23
页数:15
相关论文
共 24 条
[1]   The genetic mechanism of a translational landslide [J].
Fan, Xuan-Mei ;
Xu, Qiang ;
Zhang, Zhuo-Yuan ;
Meng, Dong-Si ;
Tang, Ran .
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2009, 68 (02) :231-244
[2]  
[冯振 Feng Zhen], 2012, [岩石力学与工程学报, Chinese Journal of Rock Mechanics and Engineering], V31, P890
[3]  
GEO-SLOPE International Ltd, 2008, STAB MOD SEEP W 2007
[4]   Entrainment of debris in rock avalanches: An analysis of a long run-out mechanism [J].
Hungr, D ;
Evans, SG .
GEOLOGICAL SOCIETY OF AMERICA BULLETIN, 2004, 116 (9-10) :1240-1252
[5]   A MODEL FOR THE RUNOUT ANALYSIS OF RAPID FLOW SLIDES, DEBRIS FLOWS, AND AVALANCHES [J].
HUNGR, O .
CANADIAN GEOTECHNICAL JOURNAL, 1995, 32 (04) :610-623
[6]  
Hungr O, 2010, USERS MANUAL DAN W D
[7]   Two numerical models for landslide dynamic analysis [J].
Hungr, Oldrich ;
McDougall, Scott .
COMPUTERS & GEOSCIENCES, 2009, 35 (05) :978-992
[8]   Simplified models of spreading flow of dry granular material [J].
Hungr, Oldrich .
CANADIAN GEOTECHNICAL JOURNAL, 2008, 45 (08) :1156-1168
[9]  
Ji SW., 2000, CHIN J GEOL HAZARD C, V11, P49
[10]  
Li YQ., 1998, SICHUAN TODAY, V11, P32