Industrial applications of electron beam flue gas treatment - From laboratory to the practice

被引：48

作者：

Chmielewski, Andrzej G. ^{[1
]}

机构：

[1] Inst Nucl Chem & Technol, PL-03195 Warsaw, Poland

[2] Warsaw Univ Technol, Fac Chem & Proc Engn, PL-03195 Warsaw, Poland

来源：

RADIATION PHYSICS AND CHEMISTRY | 2007年 / 76卷 / 8-9期

关键词：

electron accelerator; flue gas treatment; sulfur dioxide; nitrogen oxides; VOC;

D O I：

10.1016/j.radphyschem.2007.02.056

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The electron beam technology for flue gas treatment (EBFGT) has been developed in Japan in the early 1980s. Later on, this process was investigated in pilot scale in the USA, Germany, Japan, Poland, Bulgaria and China. The new engineering and process solutions have been developed during the past two decades. Finally industrial plants have been constructed in Poland and China. The high efficiency of SOx and NOx removal was achieved (up to 95% for SOx and up to 70% for NOx) and by-product is a high quality fertilizer. Since the power of accelerators applied in industrial installation is over I MW and requested operational availability of the plant is equal to 8500 h in year, it is a new challenge for radiation processing applications. (C) 2007 Elsevier Ltd. All rights reserved.

引用

页码：1480 / 1484

页数：5

共 33 条

[1] Corrosion resistant Ti-Pd surface alloys produced by high intensity pulsed plasma beams Part II. Deposition by pulsed implantation doping mode with palladium implantation using a MEVVA source [J].

Bonilla, FA ;

Skeldon, P ;

Thompson, GE ;

Piekoszewski, J ;

Chmielewski, AG ;

Sartowska, B ;

Stanislawski, J .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (16-17) :4684-4692

[2] Corrosion resistant Ti-Pd surface alloys produced by high intensity pulsed plasma beams Part 1. Deposition by pulsed erosion and vacuum evaporation/pulsed implantation doping modes [J].

Bonilla, FA ;

Skeldon, P ;

Thompson, GE ;

Piekoszewski, J ;

Chmielewski, AG ;

Sartowska, B ;

Stanislawski, J ;

Bailey, P ;

Noakes, TCQ .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (16-17) :4674-4683

[3]

Chmielewski AG, 2005, NUKLEONIKA, V50, pS17

[4] Influence of gas flow patterns on NOx removal efficiency [J].

Chmielewski, AG ;

Tyminski, B ;

Dobrowolski, A ;

Machi, S .

RADIATION PHYSICS AND CHEMISTRY, 1998, 52 (1-6) :339-343

[5] PILOT-PLANT FOR FLUE-GAS TREATMENT - CONTINUOUS OPERATION TESTS [J].

CHMIELEWSKI, AG ;

TYMINSKI, B ;

LICKI, J ;

ILLER, E ;

ZIMEK, Z ;

RADZIO, B .

RADIATION PHYSICS AND CHEMISTRY, 1995, 46 (4-6) :1067-1070

[6] TECHNOLOGICAL-DEVELOPMENT OF EB FLUE-GAS TREATMENT BASED ON PHYSICS AND CHEMISTRY OF THE PROCESS [J].

CHMIELEWSKI, AG .

RADIATION PHYSICS AND CHEMISTRY, 1995, 46 (4-6) :1057-1062

[7] Operational experience of the industrial plant for electron beam flue gas treatment [J].

Chmielewski, AG ;

Licki, J ;

Pawelec, A ;

Tyminski, B ;

Zimek, Z .

RADIATION PHYSICS AND CHEMISTRY, 2004, 71 (1-2) :441-444

[8] Reduction of VOCs in flue gas from coal combustion by electron beam treatment [J].

Chmielewski, AG ;

Ostapczuk, A ;

Zimek, Z ;

Licki, J ;

Kubica, K .

RADIATION PHYSICS AND CHEMISTRY, 2002, 63 (3-6) :653-655

[9]

CHMIELEWSKI AG, 2002, ENV EFFECTS FOSSIL F

[10]

Cooper W. J., 1998, Environmental Applications of Ionizing Radiation

← 1 2 3 4 →