Optimization of Controllable Turning Parameters for High Speed Dry Machining of Super Alloy: FEA and Experimentation

被引：0
作者：
Satyanarayana, B. [1 ]
Reddy, M. Dileep [1 ]
Nitin, P. Ruthvik [1 ]
机构：
[1] VNR VJIET, Bachupally 500090, Hyderebad, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 02期
关键词：
Dry Machining; Tool Wear; Interface Temperature; FEA; Deform; 3D; ANOVA; Genetic Algorithm;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In dry machining, Interference Temperature plays a major role for Tool Wear and change in workpiece properties. Interface temperature and Tool wear are mainly affected by controllable turning parameters such as cutting speed, feed and depth of cut. The research aim of this paper is to minimize tool wear by optimizing controllable turning parameters during high speed dry turning of super alloy Inconel 718. Full Factorial Design of Experiments is planed with 3 Levels for the purpose. A Finite Element Analysis model is created using Deform 3D software. The FEA outcomes are compared with Experimental results. ANOVA is carried out for the experimental results and mathematical models are developed for both the responses and are used for formulating a multi objective optimization. Multi-objective optimization is carried out using Genetic Algorithm. Satisfactory results are obtained through this research work and can be adopted in Industries. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2203 / 2212
页数：10
相关论文
共 18 条
  • [11] Lotfi Mohammad, 2014, EFFECT CHIP BREAKER
  • [12] Mahdavinejad R.A., 2009, J ACHIEVEMENTS MAT M, V37, P571
  • [13] Satyanarayana B., COMPUTATIONAL METHOD
  • [14] Tamizharasam T., 2012, IJSIMM
  • [15] Uhlmann E., CIRP WORKSH FE SIM C
  • [16] Yang Libin, 2010, MODELLING INERTIA WE, V718, P2
  • [17] A finite element analysis of orthogonal machining using different tool edge geometries
    Yen, YC
    Jain, AR
    Altan, T
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 146 (01) : 72 - 81
  • [18] Zorev N.N., 1963, P INT PRODUCTION ENG, P42
12