A comparative study on 2D and 3D magnetic field analysis of permanent magnet synchronous motor using FEM simulations

被引：9

作者：

Pechlivanidou, Maria C. ^{[1
]}

Chasiotis, Ioannis D. ^{[1
]}

Karnavas, Yannis L. ^{[1
]}

机构：

[1] Democritus Univ Thrace, Dept Elect & Comp Engn, Elect Machines Lab, GR-67100 Xanthi, Hellas, Greece

来源：

JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS | 2019年 / 33卷 / 17期

关键词：

2D and 3D finite-element analysis; airgap flux density distribution; solution accuracy; surface-mounted magnets; permanent magnet synchronous motor; FINITE-ELEMENT-ANALYSIS; INDUCTION-MOTORS; DESIGN; COMPUTATION;

D O I：

10.1080/09205071.2019.1674190

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Permanent magnet synchronous motors (PMSMs) have recently gained increasing industrial and research interest. The PMSM design and especially its performance evaluation through two-dimensional (2D) and three-dimensional (3D) magnetic field analysis using finite element method (FEM) is not trivial, as it is a quite demanding and time consuming procedure. Furthermore, there has always been doubt on the accuracy of 2D analysis results and on which type of analysis is the most preferable one for the specific motor. This work aims to emphasize the difficulties and the advantages that arise from the 3D analysis. The aforementioned simulations were performed for the case of a four-pole PMSM. Several magnetic and electromechanical quantities have been determined. Additionally, various materials were utilized for the construction of stator and rotor cores and their effect on the motor's behavior was investigated. Finally, the derived results are compared and useful conclusions regarding the solution accuracy are given.

引用

页码：2215 / 2241

页数：27

共 29 条

[1] 3-DIMENSIONAL MAGNETIC-FIELD COMPUTATION BY A COUPLED VECTOR-SCALAR POTENTIAL METHOD IN BRUSHLESS DC MOTORS WITH SKEWED PERMANENT-MAGNET MOUNTS - THE FORMULATION AND FE GRIDS
ALHAMADI, MA
DEMERDASH, NA
[J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 1994, 9 (01) : 1 - 14
[2] FINITE-ELEMENT ANALYSIS OF CAGE INDUCTION-MOTORS FED BY STATIC FREQUENCY-CONVERTERS
ARKKIO, A
[J]. IEEE TRANSACTIONS ON MAGNETICS, 1990, 26 (02) : 551 - 554
[3] Design techniques for reducing the cogging torque in surface-mounted PM motors
Bianchi, N
Bolognani, S
[J]. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2002, 38 (05) : 1259 - 1265
[4] Analyzing distinctive rotor poles of the axial flux PM motors by using 3D-FEA in view of the magnetic equivalent circuit
Cetin, Emrah
Daldaban, Ferhat
[J]. ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2017, 20 (05): : 1421 - 1429
[5] Chasiotis I.D., 2017, Hybrid Electric Vehicles
[6] Comparison of 2D and 3D magnetic field analysis of single-phase shaded pole induction motors
Dalcali, Adem
Akbaba, Mehmet
[J]. ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2016, 19 (01): : 1 - 7
[7] On-Load Back EMF of PMSM Using Maxwell Stress Tensor
de Paula, Geyverson T.
Monteiro, Jose Roberto B. de A.
de Alvarenga, Bernardo P.
de Almeida, Thales E. P.
Pereira, William C. A.
de Santana, Marcelo P.
[J]. IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (07)
[8] Magnetic circuit model and finite-element analysis of a modular switched reluctance machine with E-core stators and multi-layer common rotors
Ding, Wen
Yin, Zhonggang
Liu, Ling
Lou, Jianyong
Hu, Yanfang
Liu, Yunpeng
[J]. IET ELECTRIC POWER APPLICATIONS, 2014, 8 (08) : 296 - 309
[9] Comparative Study of Surface-Mounted and Interior Permanent-Magnet Motors for High-Speed Applications
Dong, Jianning
Huang, Yunkai
Jin, Long
Lin, Heyun
[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (04)
[10] A time-stepped 2D-3D finite element method for induction motors with skewed slots modeling
Dziwniel, P
Piriou, F
Ducreux, JP
Thomas, P
[J]. IEEE TRANSACTIONS ON MAGNETICS, 1999, 35 (03) : 1262 - 1265

← 1 2 3 →