Lubricant ageing effects on the friction characteristics of wet clutches

被引:18
|
作者
Berglund, K. [1 ]
Marklund, P. [1 ]
Larsson, R. [1 ]
机构
[1] Lulea Univ Technol, Div Machine Elements, SE-97187 Lulea, Sweden
关键词
wet clutch; lubricant degradation; oxidation; ATF; stick-slip; shudder; lubricant ageing; sintered bronze; ruler; remaining useful life;
D O I
10.1243/13506501JET734
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The friction characteristics and performance of wet clutches have been investigated by several authors. Studies have also been made to understand the frictional performance during the service life of the clutch system. However, most lifetime studies have been conducted for systems with paper-based friction material so that systems using sintered bronze friction material remain largely unexplored. To study the friction performance of how these systems can vary over time, the friction characteristics for a clutch system using lubricants aged in three different ways were compared. The effects on friction characteristics resulting from oxidation of the lubricant, reduced additive concentration, and ageing under real operating conditions in a wet clutch test rig were studied. The oxidation effects on friction characteristics were examined using a modified waterless turbine oil oxidation stability test on a fully formulated lubricant. Five oxidation time periods from 48 to 408 h were investigated. For each period of oxidation, a friction performance test was run using a pin-on-disc machine. The ageing carried out in a wet clutch test rig is a standard test of a wet clutch systems manufacturer which is used in order to verify that an oil-friction disc combination will last the full service life of the specific application. This test gives a realistic ageing process similar to that in a wet clutch in a field test. Under boundary-lubricated conditions, additives are vital to the performance of wet clutches. Therefore, the effect of reducing the additive concentration in the oil was also studied, in the range of 10 to 100 per cent of the original additive package used in the fully formulated wet clutch lubricant. Results showed that a general friction increase can be observed for oxidation, additive reduction, and test rig ageing. It was also concluded that different methods of simulating the wet clutch ageing process differ and cannot be directly correlated with each other.
引用
收藏
页码:639 / 647
页数:9
相关论文
共 50 条
  • [31] Study of delamination of wet clutches
    Kaneko, Hiroyuki
    Suzuki, Atsushi
    JSAE review, 1999, 20 (03): : 319 - 323
  • [32] Fault Diagnosis for Buckling Friction Components in Wet Multi-Disc Clutches Using IHHT
    Feng, Yuqing
    Zheng, Changsong
    Yu, Liang
    Wei, Chengsi
    Ouyang, Xiangjun
    Journal of Beijing Institute of Technology (English Edition), 2024, 33 (04): : 326 - 336
  • [33] APPLYING FRICTION CLUTCHES AND BRAKES
    WRENSCH, BE
    ELECTRO-TECHNOLOGY, 1967, 79 (01): : 38 - &
  • [34] SLIPPING OF FRICTION CLUTCHES.
    Sharipov, V.M.
    Kolomiets, S.N.
    1600, (07):
  • [35] Permeability of Sinter Bronze Friction Material for Wet Clutches (vol 51, pg 303, 2008)
    Marklund, Par
    Larsson, Roland
    Lundstrom, T. Staffan
    TRIBOLOGY TRANSACTIONS, 2016, 59 (06) : 1157 - 1158
  • [36] Fault Diagnosis for Buckling Friction Components in Wet Multi-Disc Clutches Using IHHT
    Yuqing Feng
    Changsong Zheng
    Liang Yu
    Chengsi Wei
    Xiangjun Ouyang
    JournalofBeijingInstituteofTechnology, 2024, 33 (04) : 326 - 336
  • [37] Experimental investigations of spontaneous damage to wet multi-plate clutches with carbon friction linings
    Groetsch, D.
    Stockinger, U.
    Schneider, T.
    Reiner, F.
    Voelkel, K.
    Pflaum, H.
    Stahl, K.
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2021, 85 (04): : 1043 - 1052
  • [38] Wet Clutch Friction Interfaces under Water-Contaminated Lubricant Conditions
    Fatima, N.
    Marklund, P.
    Mathew, A. P.
    Larsson, R.
    TRIBOLOGY TRANSACTIONS, 2016, 59 (03) : 441 - 450
  • [39] FRICTION MATERIALS FOR OVERLOAD CLUTCHES
    CROLLA, DA
    TRIBOLOGY INTERNATIONAL, 1979, 12 (04) : 155 - 160
  • [40] Multiphase Drag Modeling for Prediction of the Drag Torque Characteristics in Disengaged Wet Clutches
    Pahlovy, Shahjada
    Mahmud, Syeda Faria
    Kubota, Masamitsu
    Ogawa, Makoto
    Takakura, Norio
    SAE INTERNATIONAL JOURNAL OF COMMERCIAL VEHICLES, 2014, 7 (02) : 441 - 447