Corrosion behaviour of Fe-25Cr alloy in wet CO2 gas at 650 °C: Effects of chloride deposits and Si plus Mn alloying addition

被引:8
作者
Cai, Yuchen [1 ]
Nguyen, Thuan Dinh [1 ]
Zhang, Jianqiang [1 ]
Gleeson, Brian [2 ]
Young, David [1 ]
机构
[1] Univ New South Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia
[2] Univ Pittsburgh, Dept Mech Engn & Mat Sci, Pittsburgh, PA 15261 USA
基金
澳大利亚研究理事会;
关键词
Fe-Cr alloys; Wet CO2; Chloride; Alloying effect; High temperature corrosion; HIGH-TEMPERATURE CORROSION; FE-CR; NI ALLOYS; HYDROGEN-CHLORIDE; COMMERCIAL ALLOYS; STAINLESS-STEEL; CHROMIA SCALES; WATER-VAPOR; ALPHA-IRON; OXIDATION;
D O I
10.1016/j.corsci.2021.110001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A model ferritic Fe-25wt% Cr alloy exposed to an Ar-60CO2-20H2O gas mixture at 650 degrees C experienced rapid oxide scale growth and simultaneous internal carburization. When a deposit of NaCl-KCl was present on the alloy surface, it developed a more porous oxide scale and more extensive carburization. In the absence of salt, alloy additions of Si+Mn led to improved protection: slow oxide scaling and no carburization. In the presence of salt, this protection was much reduced. These effects are discussed in terms of oxide volatilisation and ferrite chromium concentration depletion by carburization.
引用
收藏
页数:19
相关论文
共 56 条
[1]   The oxidation behaviour of the 9% Cr steel P92 in CO2- and H2O-rich gases relevant to oxyfuel environments [J].
Abellan, Javier Piron ;
Olszewski, Tomasz ;
Meier, Gerald H. ;
Singheiser, Lorenz ;
Quadakkers, Willem J. .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2010, 101 (02) :287-299
[2]   Effect of Hydrogen Chloride on Corrosion Behaviour of Fe-Cr Alloys in Wet CO2 Gas at 650 °C [J].
Aye, Khaing Khaing ;
Zhang, Jianqiang ;
Young, David J. .
OXIDATION OF METALS, 2020, 94 (1-2) :51-80
[3]   The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres Part II:: Experimental investigations [J].
Bender, R ;
Schütze, M .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2003, 54 (09) :652-686
[4]   The role of alloying elements in commercial alloys for corrosion resistance in oxidizing-chloridizing atmospheres -: Part I:: Literature evaluation and thermodynamic calculations on phase stabilities [J].
Bender, R ;
Schütze, M .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2003, 54 (08) :567-586
[5]   SOLUTE DIFFUSION IN ALPHA-IRON AND GAMMA-IRON [J].
BOWEN, AW ;
LEAK, GM .
METALLURGICAL TRANSACTIONS, 1970, 1 (06) :1695-&
[6]   DIFFUSION OF CHROMIUM IN ALPHA-IRON [J].
BRAUN, R ;
FELLERKNIEPMEIER, M .
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 1985, 90 (02) :553-561
[7]   VOLUME AND GRAIN-BOUNDARY DIFFUSION OF C-14 IN ALPHA-FE [J].
BUDKE, E ;
HERZIG, C ;
WEVER, H .
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 1991, 127 (01) :87-101
[8]   Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler [J].
Davidsson, Kent O. ;
Amand, Lars-Erik ;
Leckner, Bo ;
Kovacevik, Borka ;
Svane, Maria ;
Hagstrom, Magnus ;
Pettersson, Jan B. C. ;
Pettersson, Jesper ;
Asteman, Henrik ;
Svensson, Jan-Erik ;
Johansson, Lars-Gunnar .
ENERGY & FUELS, 2007, 21 (01) :71-81
[9]   Control of M23C6 carbides in 0.45C-13Cr martensitic stainless steel by means of three representative heat treatment parameters [J].
de Andres, CG ;
Caruana, G ;
Alvarez, LF .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 241 (1-2) :211-215
[10]   CARBURIZATION OF FE-CR ALLOYS DURING OXIDATION IN DRY CARBON DIOXIDE [J].
FUJII, CT ;
MEUSSNER, RA .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1967, 114 (05) :435-&