Improvement in Mechanical Properties and Heat Resistance of PLLA-b-PEG-b-PLLA by Melt Blending with PDLA-b-PEG-b-PDLA for Potential Use as High-Performance Bioplastics

Ecofriendly poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) (PLLA-b-PEG-b-PLLA) are flexible bioplastics. In this work, the blending of poly(D-lactide)-b-poly(ethylene glycol)-b-poly(D-lactide) (PDLA-b-PEG-b-PDLA) with various blend ratios for stereocomplex formation has been proved to be an effective method for improving the mechanical properties and heat resistance of PLLA-b-PEG-b-PLLA films. The PLLA-b-PEG-b-PLLA/PDLA-b-PEG-b-PLDA blend films were prepared by melt blending followed with compression molding. The stereocomplexation of PLLA and PDLA end-blocks were characterized by differential scanning calorimetry and X-ray diffraction (XRD). The content of stereocomplex crystallites of blend films increased with the PDLA-b-PEG-b-PDLA ratio. From XRD, the blend films exhibited only stereocomplex crystallites. The stress and strain at break of blend films obtained from tensile tests were enhanced by melt blending with the PDLA-b-PEG-b-PDLA. The heat resistance of blend films determined from testing of dimensional stability to heat and dynamic mechanical analysis were improved with the PDLAb-PEG-b-PDLA ratio. The sterecomplex PLLA-b-PEG-b-PLLA/PDL-b-PEG-b-PDLA films prepared by melt processing could be used as flexible and good heat-resistance packaging bioplastics.