Heat Treatment of Cold-Rolled Low-Carbon Si-Mn Dual Phase Steels

被引：13

作者：

Luo Juan-juan ^{[1
]}

Shi Wen ^{[1
]}

Huang Qun-fei ^{[1
]}

Li Lin ^{[1
]}

机构：

[1] Shanghai Univ, Mat Sci & Engn Coll, Shanghai 200072, Peoples R China

来源：

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2010年 / 17卷 / 01期

基金：

中国国家自然科学基金;

关键词：

dual phase steel; overageing; microstructure; mechanical property; vanadium;

D O I：

10.1016/S1006-706X(10)60045-3

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effects of overageing (OA) and vanadium addition on microstructure and properties of cold-rolled low-carbon Si-Mn dual phase (DP) steel sheets are studied. The results show that the microstructure and mechanical properties of DP steers are greatly affected by OA temperature. When OA is done at low temperatures (473 573 K), the elongation rate increases sharply while both the yield strength and tensile strength decrease significantly. When OA is done at high temperatures (>573 K) the elongation does not further increase, but the yield strength increases and tensile strength decreases, which deteriorates the mechanical properties of the steel. The results also show that both the strength and the tempering stability can be significantly improved by vanadium microalloying. Finally, the optimum OA temperature for the traditional steel appears to be around 523 K, while it is around 573 K for the V-containing steel, resulting in the best overall mechanical properties.

引用

页码：54 / 58

页数：5

共 50 条

[31] Study of the kinetics of the recrystallization of cold-rolled low-carbon steel
C. E. Rodríguez Torres
F. H. Sánchez
A. González
F. Actis
R. Herreara
Metallurgical and Materials Transactions A, 2002, 33 : 25 - 31
[32] Inhomogeneity of cold-rolled texture in low-carbon steel sheets
Zheng, Pan-Pan
Chen, Leng
Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2015, 37 : 51 - 55
[33] Study of the kinetics of the recrystallization of cold-rolled low-carbon steel
Torres, CER
Sánchez, FH
González, A
Actis, F
Herrera, R
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (01): : 25 - 31
[34] Comparative study on static and dynamic tensile of Si-Mn low carbon steels after different heat treatment
School of Material Science and Engineering, Shanghai University, Shanghai 200072, China
Jixie Gongcheng Xuebao, 20 (104-108):
[35] PROCESS FACTORS FOR COLD-ROLLED DUAL-PHASE SHEET STEELS
FURUKAWA, T
MORIKAWA, H
ENDO, M
TAKECHI, H
KOYAMA, K
AKISUE, O
YAMADA, T
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1981, 21 (11) : 812 - 819
[36] Effect of Nb and Cr on microstructure and properties of low C and low Si cold-rolled high strength dual-phase steels
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
不详
不详
Cailiao Rechuli Xuebao, 2009, 1 (96-99+103):
[37] ANNEALING BEHAVIOR OF COLD-ROLLED LOW-CARBON PHOSPHORUS-CONTAINING STEELS WITH VARIATIONS IN SILICON CONTENT
MICHALAK, JT
HU, H
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1979, 10 (08): : 975 - 983
[38] Annealing process and microstructure evolution of cold-rolled low-carbon medium-manganese TRIP steels
Li, Zhen
Cheng, Xiao-Jie
Cai, A-Yun
Wen, Da
Shi, Jing
Zhao, Ai-Min
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2014, 35 (07): : 151 - 155
[39] Annealing softening behaviour of cold-rolled low-carbon steel with a dual-phase structure and the resulting tensile properties
Li, Z.
Wang, T. S.
Zhang, X. J.
Zhang, F. C.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 204 - 210
[40] Effect of Nanosized Phase Precipitates on the Corrosion Resistance of Cold-Rolled High-Strength Low-Carbon Niobium Microalloyed Steels
Rodionova, I. G.
Amezhnov, A., V
Arutyunyan, N. A.
Gladchenkova, Yu S.
Vasechkina, I. A.
Papshev, A. A.
METALLURGIST, 2022, 65 (9-10) : 968 - 978

← 1 2 3 4 5 →