In this paper, an efficient charge recovery method for driving piezoelectric actuators with low frequency square waves in low-power applications such as mobile microrobots is investigated. Efficiency issues related to periodic mechanical work of the actuators and the relationship among the driving electronics efficiency, the piezoelectric coupling factor, and the actuator energy transmission coefficient are discussed. The proposed charge recovery method exploiting the energy transfer between an inductor and a general capacitive load is compared with existing techniques that lead to inherent inefficiencies. A charge recovery method is then applied to piezoelectric actuators, especially to bimorph ones. Unitary efficiency can be obtained theoretically for purely capacitive loads while intrinsic losses such as hysteresis necessarily lower the efficiency. In order to show the validity of the method, a prototype driving electronics consisting of an extended H-bridge is constructed and tested by experiments and simulations. Preliminary results show that 75% of charge (i.e., more than 56% of energy) can be recovered for bending actuators such as bimorphs without any component optimization at low fields.
